|
I'm interested in seeing what the tests show. I did a cost breakdown of these 4 sealers and several others -- the sealer I've been using is one of the most expensive, and I thought it dried the fastest but that didn't prove to be the case when I objectively tested it against the other 3.
After sealing, I dip-prime my through-wired plugs with 50% Cover Stain / 50% Naphtha to get a coat of primer on the surface of the through hole, belly hook holes and belly weight voids. If the belly weight voids are deep enough to reach the through hole, I'll dip-prime again after the weights are added and epoxied.
|