Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

IFG · 04-06-2003, 06:41 PM

First get your self a lathe variable speed and some turning tools
Then a 12" Pilot drill 1/8" Dia.
Auger Bit
Some 1/2 by 1/2 square stock pine or a 1/2 inch dia dowel
that should get you started PM me when you have that

04-06-2003, 06:41 PM	#2
IFG Rocket Launcher iTrader: (0) Join Date: Feb 2003 Location: cape cod canal Posts: 322	Well There is alot First get your self a lathe variable speed and some turning tools Then a 12" Pilot drill 1/8" Dia. Auger Bit Some 1/2 by 1/2 square stock pine or a 1/2 inch dia dowel that should get you started PM me when you have that
	Two Changes and It's Legal