Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

N.ShoreFisher · 12-01-2013, 11:25 AM

Picked up an Oneida Dust Deputy cone at woodcraft the other day. I only bought the cone, not the full kit. So here's how I did it. I bought some gasket material from HD and a bucket too. Cut the 3" hole in the top of the lid. After cutting out the gasket material, I snugged it all up with 1/4"x1" bolts and silicone sealer. Works the balls!!

12-01-2013, 11:25 AM	#1
N.ShoreFisher Annisquam Assassin iTrader: (0) Join Date: Apr 2012 Location: Peabody, MA Posts: 669	Cyclone Dust Seperator Picked up an Oneida Dust Deputy cone at woodcraft the other day. I only bought the cone, not the full kit. So here's how I did it. I bought some gasket material from HD and a bucket too. Cut the 3" hole in the top of the lid. After cutting out the gasket material, I snugged it all up with 1/4"x1" bolts and silicone sealer. Works the balls!! Attached Thumbnails
	Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965