View Single Post
Old 12-10-2011, 04:21 PM   #4
Old Guy
iTrader: (0)
striperman36's Avatar
Join Date: Oct 2004
Location: Mansfield, MA
Posts: 8,760
After the 16th thinks could get interesting

For the Ariens:

Change the oil, after running it for a while and then letting it sit.

clean the plug with carb cleaner, and gap if needed

Adjust the drive belt tension

Make sure the linkage is good

Transfer case is full of lube.

hit every grease joint with grease

Tire pressure

Adjust the lower blade for wear.

Make sure the shear pins are good.

This year I plan on replacing the steel runners with the hard rubber ones
striperman36 is offline   Reply With Quote