|
 |
|
|
|
 |
|
 |
|
Boat Fishing & Boating A new forum at Striped-Bass.com for those fishing from boats and for boating in general |
 |
08-14-2014, 02:40 PM
|
#1
|
Registered User
Join Date: May 2008
Location: Chasing fat girls in the dark
Posts: 961
|
Anchor line size?
I've always used half inch anchor line which is certainly overkill for a 21' boat but I was diving in some deeper spots and leaving nobody in the boat so I wasn't taking any chances. I don't dive much anymore and the line is just about had it. Is there a boat weight to line size formula to calculate appropriate breaking strength? My anchor is a fortress rated for boats to 48'.
|
"We do not inherit the earth from our ancestors, we borrow it from our children"
|
|
|
08-14-2014, 07:13 PM
|
#2
|
Registered User
Join Date: Feb 2012
Posts: 208
|
I have a 21 that weighs 4000 lbs or so, and use 3/8" anchor line. I have been anchored in some pretty big rips such as sow and pigs in 6 footers and have never broken a line. I also pull my anchor under power and have bent a few anchors but no line breaks.
Posted from my iPhone/Mobile device
|
|
|
|
08-14-2014, 08:26 PM
|
#3
|
Registered User
Join Date: Sep 2003
Location: Libtardia
Posts: 21,692
|
I'd keep the 1/2 inch line because it's easier to pull up than a thinner diameter rope
Posted from my iPhone/Mobile device
|
|
|
|
08-14-2014, 09:41 PM
|
#4
|
Registered User
Join Date: Aug 2002
Location: RockVegas
Posts: 3,228
|
Quote:
Originally Posted by Nebe
I'd keep the 1/2 inch line because it's easier to pull up than a thinner diameter rope
Posted from my iPhone/Mobile device
|
I feel the same way about anchor rodes. I don't concern myself so much with breaking strength. The smaller diameter cuts into your hands when pulling the anchor. I prefer the overkill of the larger diameter of 1/2".
Posted from my iPhone/Mobile device
|
The future ain't what it used to be. --Yogi Berra
|
|
|
08-15-2014, 05:57 AM
|
#5
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,515
|
I'll second the 1/2" ,,,
I pull with a 20" ball,,, shackle to line, power forward , tie to stern cleat, power up and beyond anchor local and the ball brings the anchor up, pull er in
Tog fishing !
|
|
|
|
08-15-2014, 12:00 PM
|
#6
|
Registered User
Join Date: Mar 2004
Location: Marshfield, MA
Posts: 1,748
|
As others said stay with the 1/2" line....fine for your boat and much easier on the hands.
There are line rating published for the lines itself. BUT THE IMPORTANT THING TO KNOW is CHAIN and scope.
THE CHAIN IS THE KEY TO ANCORING.
For you boat I would have 20ft of 5/16" chain. This extra weight creates what they call Cantenary. Acts like a bowe (buffer) as to not jerk to line and anchor, letting the anchor line lead flater and not up to the boat.
Scope, have enough scope (extra line) as to notbe pulling up at too much of an angle.
For your boat I'd carry 200ft of rode minimum.
|
Jon, 24' Nauset-Green Topsides, Beamie, North River. Channel 68/69. MSBA, NIBA
|
|
|
08-15-2014, 04:07 PM
|
#7
|
Registered User
Join Date: May 2008
Location: Chasing fat girls in the dark
Posts: 961
|
Thanks everyone. Seems to be a huge swing in pricing out there. Any good sources? I'm finding pricing from $1.5 per ft to $45 for 200'. I'm assuming somewhere in the middle is good?
I will be splicing a wye with loops for cleats down to an eye to shackle to the main rhode, etc. Don't want the cheap stuff that sucks to splice.
|
"We do not inherit the earth from our ancestors, we borrow it from our children"
|
|
|
08-15-2014, 04:48 PM
|
#8
|
Registered User
Join Date: Oct 2003
Location: Mass.
Posts: 82
|
There used to be a shop in Fall River, MA that sold factory seconds on braided nylon line. A lot of the guys running lobster traps bought from them as well as a lot of the quahoggers. I used to use 3/8" for my 18' skiff and carried 300' for raking purposes and never had a problem with it and I'd haul back on the line at times and it didn't cut into my hands if I did it right.
Ron
|
|
|
|
08-15-2014, 04:49 PM
|
#9
|
Registered User
Join Date: Mar 2004
Location: Marshfield, MA
Posts: 1,748
|
Don't go to Homies or Lowes and get the 3 strand nylon. That stuff never seems to be wound tight enough.
With all boat stuff this is the order of the best most of the time......
Defender, Hamilton, Jamestown,...West
1/2" 3 strand at Defender 0.75 or 1.02 depending on brand.
|
Jon, 24' Nauset-Green Topsides, Beamie, North River. Channel 68/69. MSBA, NIBA
|
|
|
08-15-2014, 05:59 PM
|
#10
|
Seldom Seen
Join Date: May 2001
Posts: 10,543
|
Quote:
Originally Posted by beamie
As others said stay with the 1/2" line....fine for your boat and much easier on the hands.
There are line rating published for the lines itself. BUT THE IMPORTANT THING TO KNOW is CHAIN and scope.
THE CHAIN IS THE KEY TO ANCORING.
For you boat I would have 20ft of 5/16" chain. This extra weight creates what they call Cantenary. Acts like a bowe (buffer) as to not jerk to line and anchor, letting the anchor line lead flater and not up to the boat.
Scope, have enough scope (extra line) as to notbe pulling up at too much of an angle.
For your boat I'd carry 200ft of rode minimum.
|
This is spot on. 1/2 inch, chain, scope.
I scored two complete anchor set ups at yard sales this spring. Now if I could just find time to get out on the boat......
|
|
|
|
08-15-2014, 07:30 PM
|
#11
|
Registered User
Join Date: Nov 2003
Location: On my boat
Posts: 9,703
|
3rd in agreement with Jon.
Chain is key.
Have as much chain as the length of your boat.
Posted from my iPhone/Mobile device
|
|
|
|
08-15-2014, 08:41 PM
|
#12
|
Registered User
Join Date: May 2008
Location: Chasing fat girls in the dark
Posts: 961
|
Quote:
Originally Posted by Raider Ronnie
3rd in agreement with Jon.
Chain is key.
Have as much chain as the length of your boat.
Posted from my iPhone/Mobile device
|
Thanks. Your avatar is hilarious BTW. Says it all. If you could only have Deval pointing pack in a jousting position, it would be complete.
|
"We do not inherit the earth from our ancestors, we borrow it from our children"
|
|
|
 |
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 05:38 PM.
|
| |