| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
03-05-2004, 10:38 AM
|
#1
|
|
Dave's Guide Service
Join Date: Jul 2001
Location: Cape Cod
Posts: 7,557
|
Cape Sams
Hey Steve I need oil primer
what should I get 
those plugs are pissa. Im gettin ready to do some paint for My stash soon as it gets warmer |
Pro Tool Club....
|
|
|
|
03-05-2004, 10:42 AM
|
#2
|
|
BigFish Bait Co.
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
|
No stash left....I came by the "man cave" during the night and cleaned you out!  
Bet ya didn't see me that time!  |
Almost time to get our fish on!!! 
|
|
|
|
|
03-05-2004, 05:39 PM
|
#3
|
|
Really Old & Really Grumpy
Join Date: Jun 2002
Location: not a clue
Posts: 4,860
|
give ya a hint,,,,gibbs used eegshell finish in oil,3 coats, so I'm thinking that rust o leum in satin is the way to go.. flat is a bit to soft.. the more shine in the paint the harder it is.
|
BOAT fish do count.
|
|
|
|
|
03-05-2004, 07:17 PM
|
#4
|
|
Dave's Guide Service
Join Date: Jul 2001
Location: Cape Cod
Posts: 7,557
|
could I have a few of Your plugs to see if I like the paint then......  |
Pro Tool Club....
|
|
|
|
|
03-05-2004, 09:29 PM
|
#5
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,125
|
Dave, I used Benjamin Moore oil primer for a batch of plugs recently, but I like the Bullseye 123 zinseer stuff in the blue can, it has a slight sheen to it too.
|
|
|
|
|
|
|
03-06-2004, 01:14 AM
|
#6
|
|
Dave's Guide Service
Join Date: Jul 2001
Location: Cape Cod
Posts: 7,557
|
I need some afro sheen
|
Pro Tool Club....
|
|
|
|
|
03-06-2004, 05:05 PM
|
#7
|
|
Hardcore Equipment Tester
Join Date: Mar 2001
Location: Abington, MA
Posts: 6,234
|
soul glo...
There was an interesting article in this month Home Handyman, on waterproofers, that can be painted over. Behr makes one, and there was another, I will look for the info and post it later.
|
Bent Rods and Screaming Reels!
Spot NAZI
|
|
|
|
|
03-07-2004, 01:28 AM
|
#8
|
|
Dave's Guide Service
Join Date: Jul 2001
Location: Cape Cod
Posts: 7,557
|
im using 2 types on the same wood now.
will see soon...
hi Bill Hi CS
|
Pro Tool Club....
|
|
|
|
|
03-07-2004, 09:04 PM
|
#9
|
|
Registered Grandpa
Join Date: Nov 2003
Location: east coast
Posts: 8,592
|
BM, how much longer we need to wait to see your newbies?  |
|
|
|
|
|
|
03-07-2004, 10:46 PM
|
#10
|
|
Dave's Guide Service
Join Date: Jul 2001
Location: Cape Cod
Posts: 7,557
|
 I went out today and tested some bm's
guess im getting good at this.
I tested other lures I have gotten, But im afraid to post results
But I would like to, to be honest and maybe help a few out in what they need to do.
I cant stress that the thery behind tweaking a lure needs to be put through the paces and time in on the wood. and tweaking the lure. |
Pro Tool Club....
|
|
|
|
|
03-07-2004, 10:59 PM
|
#11
|
|
Hardcore Equipment Tester
Join Date: Mar 2001
Location: Abington, MA
Posts: 6,234
|
Hey Bubbah, how much longer???
|
Bent Rods and Screaming Reels!
Spot NAZI
|
|
|
|
|
03-07-2004, 11:14 PM
|
#12
|
|
Calling Jon The Fisherman
Join Date: Jan 2003
Location: The Sack Of Mass
Posts: 2,357
|
If your going to use Ben Moore use the 02400 or the 09400 oil primers. They will penetrate the wood and give good bite. Capesams is right about the higher sheen levels being harder and you could put a coat of eggshell oil white (10801) on after that, but the primer is a must before paint. I wouldn't go high gloss though because you may encounter adhesion issues. Just my 2 cents. Also make sure the primer and oil paint has had more than enough time to fully dry if you're going to put createx over it, any residual oils and the paint will be very unhappy.
-Dave
|
Surf Asylum Lures, Custom Lures for the "Committed"
Official S-B Sponsor
|
|
|
|
|
03-07-2004, 11:42 PM
|
#13
|
|
Dave's Guide Service
Join Date: Jul 2001
Location: Cape Cod
Posts: 7,557
|
Bill, not sure if You be yakin bout plugs or Bass.
But I will say this look at the tides toward the buid of the new moon.
perfect Timing for where I will be
Migrating Tide
|
Pro Tool Club....
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:42 PM.
|
| |
Linear Mode
