Envirotex lite redo

[Kadywampus]

I covered a batch of plugs with envirotex and I didn't get the mixture perfect or I didn't mix it well enough , whatever , but the plugs are still a tad tacky.
I plan on recoating them again . How should I prep the plugs before reapplying ?
Also , what is the best way to measure the mixtures from the 16oz bottles?
Help ?

[justplugit]

If it's still tackey just recoat.If it drys scuff it with a fine Scoth brite pad and recoat. Alot of guys use the graduated plastic medicine cups, or try the tops of pepsi bottles and then throw away. Mix for at least 4 mins.

[Kadywampus]

Should I wipe the plugs with anything b4 or after scuffing ?

[MAC]

not if they' re still tacky. I never wipe a plug at all with chemicals. After scuffing up the scratch coat I clean the plug off with compressed air. The main thing to remember is clean your hands. The oils from your skin can reek
havoc on your finish.

[Slipknot]

he's right about the oil from your hands, I always tack them off with Wilbond(thanks C.S.)
I use medicine syringes to measure small amounts of E-tex and it works well.

[Kadywampus]

Thanks guys , I'll recoat tonight.