I just installed the MPU kit on two 704's and they were pretty wobbly, I ended up using some washers on the opposite side of the pick-up kit to add weight and it improved the situation. Might want to give that a try.
There was a article in the NE Fisherman about a month ago.
Take the rotor cup off an set it on the head of a roofing nail.Add weight to the opposite side of the line roller till it balances.
I take a pc of 1/8" round rope lead an form it to the shape of the inside of the cup where the triangular thing is.I beat it flat an epoxied it in place.I take a awl an scratch the area where I want the epoxy to go an wipe everything down with alcohol to be sure it's clean so i have a good bond..30 min stuff in the syringe is fine..Do not go crazy with the epoxy.I will become a sand catch in there.Just enough to hold the lead an cover it to make it nice an smooth..
It works OK.After a while.I can barely tell the difference between the ones I have done an the ones I have left alone..
FORE!
It's usually darkest just before it turns Black..
“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
Hybrid Mode
