| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
01-17-2011, 05:00 PM
|
#1
|
|
Registered User
Join Date: Dec 2010
Posts: 134
|
Learning curve
Well, thought I would start a new thread on beginning to learn to build plugs. Today I began to paint the Danny's. One is pine from a 2x2 and the other I made from leftover wood from an oak hand rail. The pine takes paint fantastic, the oak doesnt want to hold the paint in the grain.
The other picture... I decided to use the other Oak to play around with two small 4 1/2" swimmers and one 5" needle. I drilled out the butt of the needle for a weight and drilled close to the front for the weight on the swimmers. should be interesting to experiment with these.
back to the real world and work tomorrow.
Hookset.
|
|
|
|
|
|
01-17-2011, 05:29 PM
|
#2
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Look good. Don't forget to enjoy the process and don't be too hard on yourself if you make a mistake. I constantly make them. It's all fun.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
01-18-2011, 09:45 AM
|
#3
|
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Oak is a heavy open pored wood that is hard to use for plug building. Can work with diving plugs but may be sluggish for a surface plug and won't carry much weight before it sinks.
I'm not sure what you mean by a 2x2, but if you are talking about dimensional home building lumber, that is usually spruce or fir (not pine) I think.
Check out Mikes or Salty's. Both sell dimensioned woods that may work better for you. Alternatively, find a hardwood dealer, buy a plank, and slice it up yourself.
|
|
|
|
|
|
|
01-18-2011, 11:11 AM
|
#4
|
|
Registered User
Join Date: Sep 2006
Location: S. Jersey Shore
Posts: 912
|
Don't know were in Jersey you are but I think a trip to Medford Cedar for some AYC and Red Cedar would be a good idea.
|
 "The lips stand out because she wants to suck on your Pikie."....Mike Laptew
Van Staal Service/Repair Technician
|
|
|
|
|
01-18-2011, 03:16 PM
|
#5
|
|
Registered User
Join Date: Feb 2005
Location: Grafton, Ma
Posts: 505
|
Your off to a great start! If you have the wood, might as well use it to get the hang of things, but as others have said you might want to grab some cedar if possible. You really appreciate the difference. Anyway...keep it up and enjoy the time.
|
|
|
|
|
|
|
01-18-2011, 04:24 PM
|
#6
|
|
Registered User
Join Date: Dec 2010
Posts: 134
|
Thanks for all the feedback. I have two pieces of cedar from Salty's. You are going to laugh, but I am afraid to use it until my skills are worthy! I think I am just about there through, may have to give it a try!
Hookset
|
|
|
|
|
|
|
01-18-2011, 08:32 PM
|
#7
|
|
Registered User
Join Date: Jan 2010
Location: S. Easton
Posts: 1,676
|
Wood mill blanks
Quote:
Originally Posted by Hookset
Thanks for all the feedback. I have two pieces of cedar from Salty's. You are going to laugh, but I am afraid to use it until my skills are worthy! I think I am just about there through, may have to give it a try!
Hookset
|
When I first started turning I found wood dowels in the trash, broom sticks and wood railings, tried to keep it cheap while I learned. One day a friend of mine intruduced me to a guy that owned a mill. $20 bucks = 100+ 10" blanks of pine. Some knots, just cut around them. Pine is easy to turn, sand and doesn't beat up the bowl gouges.
Google "wood mills"
I found more than one in my area.
Blond Terror gave me two blanks of AYC and I haven't used the yet. Can't make up my mind what to turn.... 
Hope this helps....
Mike |
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 04:35 AM.
|
| |
Linear Mode
