| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
11-28-2005, 06:45 PM
|
#1
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Flipper
so far I've tried the single plug flip,I built an epoxy ferris wheel and the motorized inline heated epoxy box .. To make a long story short flipping produced the best results. When I spun the plugs inline the weighted plugs spun unevenly and the epoxy sagged.. The ferris wheel was a mother to put the epoxy on the plugs, always had voids.. The single flip was best but my fat dead fingers would drop the wet plugs on the dirty floor. With all the epoxy talk I thought I'd share the latest group flip proto with the barrel swivels I can spin the plugs and apply the epoxy much better.. Wearing a glove on one hand while moving the plugs has stopped my epoxy crawl..Working on the kitchen table and pre heating to room temperature plugs and epoxy has really cleaned up my finish . I boost the heat to 74 degrees to epoxy ... free plugs,,, right ... This is a work in progress .. I acually unclip the rack and flip it and clip it back in the wooden frame... If the rack was attached to wood frame and I could just spin it would be my next modification .. I have a nice wife that doesn't even blink when I do all this stuff .. One other mod would be to put washers or wrap tin foil around barrel swivels ..Had epoxy run in 2 of them and had to swap them out .. after a number of plugs though ..
Having trouble attaching pics ... will try latter sorry
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
11-28-2005, 07:58 PM
|
#2
|
|
"Fishbucket"
Join Date: Feb 2004
Location: Bahston Hahbah
Posts: 6,588
|
tagger how about jamming a straw arround the swivel.
the large dunkin' dognuts straws are a tight fit between my swivel and the belly gromet so no clear gets down in the belly hole to ruin the swivel.
|
|
|
|
|
|
11-28-2005, 08:25 PM
|
#3
|
|
Registered Papa
Join Date: Mar 2005
Location: "Da Cape"
Posts: 368
|
I'm still new at this so sorry foir the stupid ?. Dosen't the staw get sealed in the hole by the eoxy. Does a razor blade do a good enough job of cutting it out.
|
|
|
|
|
|
|
11-28-2005, 08:56 PM
|
#4
|
|
Registered User
Join Date: Oct 2002
Location: Kentucky
Posts: 1,442
|
Apply epoxy to plug, then attach to "ferris wheel". At least thats how I've done it.
Jigman
|
|
|
|
|
|
|
11-28-2005, 09:50 PM
|
#5
|
|
Registered User
Join Date: Feb 2005
Location: Burlington
Posts: 2,290
|
I hang all the plugs on the wheel first.
I include at least one spring in each row to allow some spinning of the plugs as I epoxy.
My wheel has 16 stations that are 24" wide. I can usually stagger at least two plugs per row, even though I never do that many plugs at one time. I can easily do 20 plugs without worrying about sagging.
My method is to unhook the spring from the end and while holding the plugs out from the wheel under a bright set of lights I epoxy the two plugs. After all plugs are done I turn the wheel on and do a final check for holidays.
After a short time I use a propane torch and move it side to side under the plugs to eliminate any bubbles that may form.
I usually spin them for at least a couple of hours and sometimes overnight if I feel that the epoxy was too stiff.
Keep the working epoxy floating in a warm cup to allow easier speading.
The attached picture is of the rack when I had only 1/2 the stations.
As a bit of info, I now wire before epoxying.
dryingrack.jpg
Last edited by gone fishin; 01-14-2008 at 11:50 PM..
|
low & slow 37
|
|
|
|
|
11-28-2005, 10:41 PM
|
#6
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
sorry guys .. thread no good without pics ... having trouble posting pics .. not talking about belly swivel .. even my smilies don't work .. anybody know why ?
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
11-28-2005, 11:25 PM
|
#7
|
|
"Fishbucket"
Join Date: Feb 2004
Location: Bahston Hahbah
Posts: 6,588
|
they did some website upgrades a few days ago. you might have to log in again?  |
|
|
|
|
|
11-28-2005, 11:28 PM
|
#8
|
|
"Fishbucket"
Join Date: Feb 2004
Location: Bahston Hahbah
Posts: 6,588
|
Quote:
|
Originally Posted by outnumbered
I'm still new at this so sorry foir the stupid ?. Dosen't the staw get sealed in the hole by the eoxy. Does a razor blade do a good enough job of cutting it out.
|
there's a fine art to removing the straw somewhear in the middle.
if you forget you can always trim it up with a hobby knife. |
|
|
|
|
|
11-29-2005, 08:32 AM
|
#9
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,125
|
Quote:
|
Originally Posted by Tagger
sorry guys .. thread no good without pics ... having trouble posting pics .. not talking about belly swivel .. even my smilies don't work .. anybody know why ?
|
don't know why you have smily issues but maybe you need to check you preferences/settings under you user CP and make sure you don't have it set for the smilies turned off.
I can help with pics tagger |
The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely.
1984 was a warning, not a guidebook!
It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.
|
|
|
|
|
11-29-2005, 10:43 AM
|
#10
|
|
Registered Grandpa
Join Date: Nov 2003
Location: east coast
Posts: 8,592
|
Quote:
|
Originally Posted by Tagger
sorry guys .. thread no good without pics ... having trouble posting pics .. not talking about belly swivel .. even my smilies don't work .. anybody know why ?
|
Like Slip said, also could be your firewall. Right click your fire wall icon,turn it off while you post the pics, then back on again. |
" Choose Life "
|
|
|
|
|
11-29-2005, 03:30 PM
|
#11
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Thank you for the idea. I am hard at work building one after you told me about it a few weeks ago. I really like the idea. What would be your maximum amount of plugs at once do you think? Making mine with a frame so you can just spin it and then lock in place. I will probably make 2. What do you think stainless?  Just kidding. Great idea. Paul |
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
11-29-2005, 03:43 PM
|
#12
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
If you are going to spin it on a frame what about 2 of those set up's you have one on top of the other with something in the middle to catch any drips so not to land on row below. Would be pretty tall but get twice as many done. I think I am going to change my course and go that route. P.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
11-29-2005, 08:28 PM
|
#13
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Paul ... I do better with smaller batches of epoxy.. My mix is better and I don't have all that pressure of coating and watching a bunch of drippy plugs..My batch of epoxy covers six plugs with very little waste .. See what works for you.. but starting off with giant batches sounds scary to me ..Grrrrrr loaded new browser still no pics.. Its probably simple but i can't fix it .
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
11-29-2005, 08:44 PM
|
#14
|
|
Registered Grandpa
Join Date: Nov 2003
Location: east coast
Posts: 8,592
|
Quote:
|
Originally Posted by Tagger
.Working on the kitchen table and pre heating to room temperature plugs and epoxy has really cleaned up my finish
|
Ya, like you really needed to clean up your finish.  Ya killin me tagga, ya killin me.  |
" Choose Life "
|
|
|
|
|
11-29-2005, 09:16 PM
|
#15
|
|
Registered User
Join Date: Feb 2003
Location: Here and There Seasonally
Posts: 5,985
|
Why are you watching or spinning? Just hang them front up from a coathanger and walk away. In 30 minutes hit it with a Bernz O Matic to pop the bubbles and sprinkle your glitter. Done. If ya want a real deep shine give it another coat the next day. No flippin' nuttin'.
|
He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself.
Thomas Paine
|
|
|
|
|
11-29-2005, 09:33 PM
|
#16
|
|
"Fishbucket"
Join Date: Feb 2004
Location: Bahston Hahbah
Posts: 6,588
|
ditto,
i just pour the stuff on and walk away.
|
|
|
|
|
|
11-30-2005, 03:53 AM
|
#17
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
We comparing apples and oranges .. I'm using systems 3 mirror coat ,, You guys using envirotex.??. I got pretty finish using envirotex ,but I left it all on the rocks to easily..
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
11-30-2005, 06:43 AM
|
#18
|
|
Registered User
Join Date: Feb 2003
Location: Here and There Seasonally
Posts: 5,985
|
Forgot that you use System3. I've never even seen that stuff, so I dunno. Very few lumps in my water, so I use E-tex.
|
He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself.
Thomas Paine
|
|
|
|
|
11-30-2005, 08:17 AM
|
#19
|
|
Permanently Disconnected
Join Date: Nov 2002
Posts: 12,647
|
no smilies here either Tagger so don't feel bad, they show up in the window on the right but you can't click on them anymore to put them in the message...If you click the "more" link it doesn't work either. Botton left on screen says smilies are on, click the link and you can't click anything there either. Netscrape 7.2
|
|
|
|
|
|
|
11-30-2005, 11:24 AM
|
#20
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Quote:
|
Originally Posted by Tagger
Paul ... I do better with smaller batches of epoxy.... but starting off with giant batches sounds scary to me .
|
You are right after I thought about it last nite smaller set up is much better idea. No need to ruin a bunch of plugs at once  P. |
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
12-03-2005, 04:30 PM
|
#21
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Pic test .. I think I'm back  |
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 02:55 PM.
|
| |
Linear Mode
