| |
 |
|
|
|
 |
|
 |
| |
| Rod Building So, you've landed a nice fish on a plug you made, eh? Now, the next step, building your own RODS! |
 |
08-07-2010, 10:56 AM
|
#1
|
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,655
|
Option for Broken GLB1081M
I have a GLB 1081M with 21" broken off tip. Any possiblities with such a stiff 87" remainder of a rod?
|
Billy D.
|
|
|
|
08-07-2010, 12:09 PM
|
#2
|
|
Night Stalker
Join Date: Nov 2004
Location: ............
Posts: 3,605
|
Gaff?
|
|
|
|
|
|
08-07-2010, 02:28 PM
|
#3
|
|
Jiggin' Leper Lawyer
Join Date: Oct 2000
Location: 61° 30′ 0″ N, 23° 46′ 0″ E
Posts: 8,158
|
Heavy bottom fishing/party boat rod?
|
Wise men speak because they have something to say; Fools, because they have to say something.
|
|
|
|
|
08-07-2010, 02:53 PM
|
#4
|
|
Registered User
Join Date: May 2000
Location: Cumberland,RI
Posts: 8,555
|
Wire line trolling rod with a roller tip?
Heavy cod jigging rod. Probably handle the big cod jigs well but maybe too stiff causing hook pull outs.
Its hard to guess just how stiff it is based on what length broke off.
|
Saltheart
Custom Crafted Rods by Saltheart
|
|
|
|
|
08-07-2010, 03:09 PM
|
#5
|
|
...
Join Date: Jan 2004
Location: MA/RI
Posts: 2,411
|
Cut it down further to make a wading staff.
Posted from my iPhone/Mobile device
|
|
|
|
|
|
|
08-07-2010, 08:23 PM
|
#6
|
|
Registered User
Join Date: Jul 2004
Location: Buxton, Maine
Posts: 1,727
|
If your adventurous find a tip of similar taper. sand it clean and fit it tight inside the other rod. Fit butt ist then fit the tip.Line it all up to check fit. Use some hd epoxy and glue it together. After its set sand it smoothe then wrap the break with a thread similar color to the rod. It will be a bit heavier action but it will still work. I've repaired amny broken rods like that and they're still working from what the owners told me.Just a little stiffer action. Ron
|
|
|
|
|
|
|
08-08-2010, 10:58 AM
|
#7
|
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,655
|
Quote:
Originally Posted by stripermaineiac
If your adventurous find a tip of similar taper. sand it clean and fit it tight inside the other rod. Fit butt ist then fit the tip.Line it all up to check fit. Use some hd epoxy and glue it together. After its set sand it smoothe then wrap the break with a thread similar color to the rod. It will be a bit heavier action but it will still work. I've repaired amny broken rods like that and they're still working from what the owners told me.Just a little stiffer action. Ron
|
I might try stuffing a tip section from the butt if one becomes available. This rod with 21" broken off is super stiff. I get approx. 6" bend under load. It would make nice breachway gaff though. |
Billy D.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:42 PM.
|
| |
Linear Mode
