Dust Collectors

[pmueller]

I'm researching dust collectors. Primarily for use with a midi size lathe.
Wondering which models, H-P, and other things I should consider.
Any suggestions appreciated.

[Muskyslayer96]

Pmueller,

I have a 2HP Grizzly with a 5 micron dust filter on it and a separator can, it is attached to all my equipment. Works great. I also use an air purifier to get the real small dust (0.5 -1.0 micron dust out of the air) Thats what causes the damage to your lungs.

[mikecc]

Penn State Industries great selection

Dust Collectors at Penn State Industries

[pmueller]

I've heard good things about both suggestions. Thanks mike and muskys.

[afterhours]

i have a jet dc-1100- it sucks ..........
when i say it sucks, i'm saying it does it's job well

[pbadad]

Peter, I have a Delta floor model which is a nice cabinet syle. I opted for the large element filter option with the chip handle. It really is efficient.

[striperman36]

Originally Posted by pbadad

Peter, I have a Delta floor model which is a nice cabinet syle. I opted for the large element filter option with the chip handle. It really is efficient.

Do you have a model #

[pbadad]

Originally Posted by striperman36

Do you have a model #

Delta 50-720. With optional filter cartridge 50-720CT

1 HP Comes w/5' of 4" hose.

[striperman36]

Seems like my Jet. What is the chip handle?

[pbadad]

The chip handle is used to vibrate the cartridge filter to loosen stuck chips and make them fall into the collection bag. You rotate handle in circular motion.

[striperman36]

Originally Posted by pbadad

The chip handle is used to vibrate the cartridge filter to loosen stuck chips and make them fall into the collection bag. You rotate handle in circular motion.

I have one of those 2 doesn't work much for dust, I do it once a year in the yard with the compressor to blow as much dust as a I can out of the filter

[pmueller]

I see some one HP and two HP's. My guess is the 2 HP has more suction, but functionally speaking, whats the big difference in HP?
Will a 2 HP pick up more chips than a 1 HP?
My inclination is to go with a 2HP.

[Sgt Striper]

Originally Posted by pmueller

I see some one HP and two HP's. My guess is the 2 HP has more suction, but functionally speaking, whats the big difference in HP?
Will a 2 HP pick up more chips than a 1 HP?
My inclination is to go with a 2HP.

Dust collectors are rated by airflow, not suction like a shop vac. The higher the hp. the larger the fan blade is giving more cfm. The average 1 hp.'s are usually rated at about 600-650 cfm w/ 3" hose, 2hp around 1200 w/4" hose. If you decrease the size of your hose you decrease the airflow (cfm).
For use with a single tool a 1hp. 650 cfm is adequate, but if you wan't to set for 2-3 tools go for something in the 1200 cfm range.

[pmueller]

great input sarge and everyone else.
Thank you.

[pmueller]

Originally Posted by Sgt Striper

Dust collectors are rated by airflow, not suction like a shop vac. The higher the hp. the larger the fan blade is giving more cfm. The average 1 hp.'s are usually rated at about 600-650 cfm w/ 3" hose, 2hp around 1200 w/4" hose. If you decrease the size of your hose you decrease the airflow (cfm).
For use with a single tool a 1hp. 650 cfm is adequate, but if you wan't to set for 2-3 tools go for something in the 1200 cfm range.

Would a good rule of thumb be 1 HP for each tool?
Or better yet, how many cfm would I need for each tool?

[Rockfish9]

http://www.striped-bass.com/Stripert...irst-time.html... Try this thread... there may be something of interest for you...

[pmueller]

Awesome thread.
Thanks