| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
02-09-2011, 09:22 PM
|
#1
|
|
Registered User
Join Date: Dec 2010
Posts: 342
|
BIG problem, any ideas?
Hey guys,
I have a big problem, I sealed about 20 baits for the first time using the PVC pipe method and I went to put a coat of E-tex on them and it fish eyed all over crazy weird. I seal my baits with a 60/40 mix of sanding sealer/lacquer thinner. I have always just thrown the baits in the paint can. this time I build some PVC tubes to make the job a little easier. After the baits are sealed I always let them dry completely and then sand them and wipe them down with some denatured alcohol before hitting them with a thin coat of E-tex to give me a glassy smooth surface to prime and paint.
I'm thinking there may have been some residual oils in the PVC pipe that soaked into the wood? Any ideas?
I know it wasn't the etex because I grabbed a biat I still had laying around from the can sealing and the same batch of E-tex went on perfectly.
I would love to get some comments on how to proceed. My thoughts would be to prime the baits first and hopefully that covers whats causing the problem and then proceed with the E-tex again?
Thanks in advance,
MS
|
|
|
|
|
|
02-09-2011, 10:02 PM
|
#2
|
|
Chris Blouin
Join Date: Mar 2009
Location: Warren, RI
Posts: 3,330
|
MS, thats sucks man!!
Sounds like some kind of containment in the pvc tubing, could be oil from when its made, that stuff is full of chemicals too.
I seal my plugs in large glass jars, the kind you see pickles or pepper rings in at a deli, clean them out good and they have a screw on top so I just flip the jar every ten minutes or so to make sure the whole plug is coated.
I saw the pvc idea and thought it was cool but im sticking to what i know, less variables that way.
Oh I just etexed a batch of plugs using your plate method works great!! Thanks again.
|
STORMR Pro Staff Member
|
|
|
|
|
02-10-2011, 09:55 AM
|
#3
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
My opinion on epoxy in whatever method you are using it would not be worth a piss hole in the show, especially this year. Good luck.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
02-10-2011, 10:42 AM
|
#4
|
|
Registered User
Join Date: Jun 2008
Location: Lexington, MA
Posts: 1,940
|
mold release agent residue in the PVC pipe,,, rinse a few times with acetone, and then rinse with water several times... The acetone solvent should get rid of whatever is present...
|
 Blond Terror
|
|
|
|
|
02-10-2011, 11:01 AM
|
#5
|
|
Registered User
Join Date: Oct 2005
Posts: 2,038
|
Could the laquer thinner have eaten the PVC and released something into your sealer?
If it ain't broke, don't fix it!
Sorry to hear of your issue.
|
|
|
|
|
|
|
02-10-2011, 01:19 PM
|
#6
|
|
Certified Mass-hole
Join Date: Jun 2003
Location: Jackson, NJ but born and raised in Massachusetts.
Posts: 1,223
|
Is the PVC pipe new or was it used for something else prior to now?
PVC pipe is extruded so a mold release is not likely. Lacquer thinner may be extrapolating some of the plastisizers from teh PVC material.
Are you sure your sealer is dry?
|
|
|
|
|
|
|
02-10-2011, 04:43 PM
|
#7
|
|
Registered User
Join Date: Dec 2010
Posts: 342
|
Thanks guys,
Yeah I think the thinner is leeching plasticizer out of the PVC. I hit the baits with some BIN primer and that adhered great. I assume that that will be enough of a sealer to move forward with epoxy and paint?
How long should i wait on the primer? It drys really fast?
thank for the help.
MS
|
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:42 AM.
|
| |
Linear Mode
