|
Belly Grommet help
Ok, so I've got some belly grommets. i drilled a 3/16's hole with a forstner bit, put the grommet on the hole and the sides of the grommet stick out from the plug.
My question is, How are you recessing your grommets? Are you becding them to the contour of the plug or countersinking? I tried to cut a piece of scrap wood to the contour of a plug, put it over the grommet that was in the plug and giving it a whack. Didnt seem like bending it was goint to be easy.
What do you guys do?
Thanks in advance,
Mike
|
Threaded Mode