Abu Bg 7000 HSN

[luds]

Any opinions on this reel? I'm looking to learn conventional and have an oppurtunity to trade a spinning real I don't use for this Abu. What are the advantages/disadvantages to the narrow spool. What kind of money am I looking at to upgrade the reel....power handle etc? It says Swedish cut but is this real completely manufactured in Sweden?

Saltwater Edge Link:

http://www.saltwateredge.com/PROD//SR01

Thanks

[Back Beach]

Good reel for braid or light mono, say 20# test or under on the mono.Personally, I've never been an abu fan, and have owned a few of them.Just never liked how they felt in my hand.Narrow spool is nice, just remember your line capacity diminishes if you fill it up with mono as opposed to braid.

[Mike P]

Those gold/champagne colored HSNs are put together in Taiwan. The gears may be "Swedish cut" but the country of origin for the reel is Taiwan.

The new black HSN "i" series with instant anti-reverse, and a lever free spool control, are made in Mainland China.

The new power handle that comes standard on the "i" series will fit any existing Abu 7000 series reel, including the gold HSN. They sell for around $16. mike cc had them last year, but I don't know if he has any left or when he might be getting more

[luds]

Originally Posted by Mike P

Those gold/champagne colored HSNs are put together in Taiwan. The gears may be "Swedish cut" but the country of origin for the reel is Taiwan.

The new black HSN "i" series with instant anti-reverse, and a lever free spool control, are made in Mainland China.

The new power handle that comes standard on the "i" series will fit any existing Abu 7000 series reel, including the gold HSN. They sell for around $16. mike cc had them last year, but I don't know if he has any left or when he might be getting more

Here's my dilemma. I can have $100 or that reel. Sounds like if you were me you'd take the cash and put it towards something better.

[lurch]

you can get a 7000I HSN for 129$

Spend the extra 30$ and get the reel from M&Ds

[Krispy]

Im not sure about the 7000i for surfcasting. I found it heavy and and a little awkward. I would compare it w/ the old 7000HSN first, before purchasing if your dead set on the 7 model.
I also have the new 6500 Abu, which VERY nice and comparable to the old 6500 version. I would give the 6500 a hard look, esp. if your just starting w/ conventional

[luds]

Originally Posted by Back Beach

Good reel for braid or light mono, say 20# test or under on the mono.Personally, I've never been an abu fan, and have owned a few of them.Just never liked how they felt in my hand.Narrow spool is nice, just remember your line capacity diminishes if you fill it up with mono as opposed to braid.

Thanks. I was planning on learning how to cast with mono hopefulling advancing to a point where I felt comfortable with braid.

[Back Beach]

Originally Posted by luds48

Thanks. I was planning on learning how to cast with mono hopefulling advancing to a point where I felt comfortable with braid.

Just learn with braid, its much easier than mono.On that reel you could put plenty of 40 or 50 power pro, along with a little backing.Thats how mine was set up.Best way to learn is with something heavy on the end,then lighten up as you get better at it.With a nice heavy jig, you will look like a pro in no time.The lighter stuff can be tough, though.

[RIROCKHOUND]

Originally Posted by Back Beach

Good reel for braid or light mono, say 20# test or under on the mono.Personally, I've never been an abu fan, and have owned a few of them.Just never liked how they felt in my hand.Narrow spool is nice, just remember your line capacity diminishes if you fill it up with mono as opposed to braid.

Get a squidder.
Cheaper and more durable!
I've sold all my Abu's.

[Back Beach]

Originally Posted by RIROCKHOUND

Get a squidder.
Cheaper and more durable!
I've sold all my Abu's.

Newell 229=God's gift.