looking for a new lathe- recommendations welcome

[nicksdad]

Hi Guys-
I never post but first I want to say "THANK YOU" to all the builders on here that have freely provided so much great information over the years that has allowed me to become a pretty decent plug builder. It quickly became addicting and I'm still learning after 7 years. I turn strictly for my own use as gifts for friends. With that, I would like to trade-in my old Craftsman lathe or a smaller midi style such as a Jet or Delta etc. I would welcome any and all opinions as to models that are out there to be used primarily for plugs. Thanks in advance-Steve

[BigFish]

I don't think you can go wrong with either brand! I have a Delta midi and have zero complaints....very good machine with never an issue! Jet makes very good tools as well....I have a standup bandsaw and a bench top drill press made by Jet.......I would not hesitate buying a Jet lathe!

[stripermaineiac]

Get the Jet with the variable speed. You'll love it.

[nicksdad]

Thanks guys.

[afterhours]

lots of good stuff out there, I like the jet stuff for good middle of the road $$.

[ThrowingTimber]

Jet lathe here and its been great.
Posted from my iPhone/Mobile device

[nightfighter]

Jet 1014 with Vega duplicator. Got the lathe off Craigslist, picked up with tools in NH for $225. Got the dupe off classifieds here for $100. Both were extremely good prices and both were in very good shape. Carbide cutter from ProfessorM and collars for the duplicator from Grainger. This is a proven set up for plugs on almost any scale. Be patient and keep looking if you want to go the used route.

[nicksdad]

That's exactly what I'm doing. Thanks for the advice.-Steve