| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
12-18-2003, 01:48 PM
|
#1
|
|
I'm just getting started.
Join Date: Oct 2002
Location: Avon-by-the-Sea,N.J.
Posts: 44
|
Wire
What size wire for the through wire is best,and I take it it should be stainless.
|
Tony
|
|
|
|
12-18-2003, 03:52 PM
|
#2
|
|
Registered User
Join Date: Oct 2003
Location: Marblehead, MA
Posts: 865
|
|
|
|
|
|
|
|
12-18-2003, 04:28 PM
|
#3
|
|
Registered User
Join Date: Oct 2001
Posts: 1,990
|
just go to the local welding supply and get 308L welding wire. Cheap and strong
|
|
|
|
|
|
|
12-18-2003, 05:03 PM
|
#4
|
|
Registered User
Join Date: Jul 2002
Location: Maine
Posts: 4,547
|
It can be found on eBay for around 41 bux for 10#. shipping included
|
|
|
|
|
|
|
12-18-2003, 05:10 PM
|
#5
|
|
Permanently Disconnected
Join Date: Nov 2002
Posts: 12,647
|
be CAREFUL what you get for wire on ebay...I got 100 lbs of 308 wire that is so brittle you can't bend it more than 25 degrees without it snapping...it was advertised as er308l too....
|
|
|
|
|
|
|
12-18-2003, 05:20 PM
|
#6
|
|
eh! What do you mean?
Join Date: Sep 2003
Location: Tiverton
Posts: 763
|
which is better?
308L
or
316L
which is perfered in making larger plugs 1/8 or 5/32?
i would think 1/16 is too thin but what do i know...
|
|
|
|
|
|
|
12-18-2003, 05:33 PM
|
#7
|
|
Permanently Disconnected
Join Date: Nov 2002
Posts: 12,647
|
308 is easier to bend, .062 or smaller is fine depending on size of plug.
|
|
|
|
|
|
|
12-18-2003, 05:35 PM
|
#8
|
|
Registered User
Join Date: Jul 2002
Location: Maine
Posts: 4,547
|
I got 10# and it is great stuff. 1/16" or .062 is plenty. The larger stuff 1/8" or bigger if ya are targeting giant blue fins.
|
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:07 AM.
|
| |
Hybrid Mode