e-tex

[jomlt9@AOL.COM]

I been putting one coat on learning how to work the stuff ,,,,, feeling more confiedent now { after wreckin about 20 ) but thats all the fun trial and error wanna put 2 coats on can anyone help me with how long i have to wait to apply the 2 coat. thanks .... also im in new jersey and was on some moss bunker tonight snaggin but no fish .........just lots of bait for my com, crab traps

[redneck24]

i have hated etex since i started. now i take it all back. i finally made a spinner they came out like glass, one coat. make a spinner, what a difference, dont be stubborn like me

[black label]

this is what you do. prime it then epoxy it then paint it then epoxy it again make a bunch its much easier when you do 10 or 20 plugs at a time. the finish is better and you dont see the wood grain. here are 2 of my best catchers..

[reelecstasy]

Black Label...those are some shweet lookin plugs

[Backbeach Jake]

I put the second coat on the next day. I also don't use a spinner. I hang them and let them drip. the next day I hand the 180 degrees and let them drip again. If it's a popper, sometimes you'll be left with an epoxy-cicle if you don't stick around and wipe it off with an acid brush. E-tex is pretty easy to use, just don't touch the plug with unwashed hands, human oils, potato chip grease, and anything else will cause voids and "fish-eyes". Wash your hands religiously and watch what you spray in the shop and you'll get glass-like finishes.

[jomlt9@AOL.COM]

hey thanks guys jake my finish is sweet just wanna put two coats maybe that will help on those jetties thanks though the second day second coat