SPRAY PAINTING ?

[saltydog]

dont have a air gun an always use RATTLECANS, Im trying to gain more control over the spray, can anyone help
GOOD LUCK GOOD PLUGGIN

[Charleston]

What problems are you having?
How do you hold the plugs while applying spray paint?

[saltydog]

CHARLESTON. trying to gain more control of the paint. trying to get MORE DETAIL --->DOTS,--->STRIPES,--->LINES more like you guy do w/ Air Brushhhh. going to try CUTTING some STENCILS for DOTS,an spraying at different lenths away!

LINES for MACKREL BACKS ??????

JUST trying to IMPROVE any way I can. want to get more DIRECTION in my SPRAY---. might be ASKING to much from a CAN SPRAY but Ill PLAY with it some more.
GOOD LUCK GOOD PLUGGIN
P.S. sorry I hold them in my HAND an SPRAY W/ the outher.

[Striperknight]

Holding in you hand is a no no. Make some holders.




You will get more control.

[justplugit]

Originally Posted by saltydog

LINES for MACKREL BACKS ??????

You can cut a stencil out of aluminum foil and form fit it to the plug.

[gldnbear93]

here is a link for caps

http://artprimo.com/catalog/spray-paint-caps-c-27.html

[gldnbear93]

in addition to cardboard for templates, try using that plastic stuff that toys and electronics are packed in. You know, the stuff that you can never open without a razor and then you end up cutting yourself on the darn plastic (clamshell packaging i think is what it is called). An advantage of the clear plastic is that you can see where you are placing the template and can get a more exact location for it. Add a LITTLE heat (heat gun or blow dryer) and you can shape it a little to mold to your plug for an even crisper line.

[Charleston]

I hold my plug on the end of a hanger wire. This way I can manipulate the plug at the same time I spray the paint. This allows me to rotate, tip etc. the plug as the paint arrives at the surface.
I also have some of the paint can caps that the Graffiti artists use. They allow fogging, lines etc.

Example; When painting the red cup of a popper I can hold the plug at an angle and rotate it in my fingers/thumb as the paints applys. This gives a nice even coat and cuts it into the body color as smmoth as if you used a mask!

I need to learn to use my airbrush!!

[saltydog]

STRIPERKNIGHT,CHARLESTON,THANK YOU, Im still learning DON'T have any TOOLS, to speak of, just a Hand Drill, a Sander, an LOTS of Sand Paper. Graffiti artists ! Ill have to do a SEARCH an look for CAPS. THANK'S AGAIN
GOOD LUCK GOOD PLUGGIN

[basswipe]

Not to hijack but if you're gonna use spraypaint one way to get a much better finish is to go out get a spraycan of Minwax Helmsman spar poly and replace the nozzle on the paint with the one from the poly.

The poly nozzle sprays a flat pattern and is adjustable between horizontal and vertical.The poly nozzle also produces a "finer" spray.

[LaPala]

Here's a few tips:

• A warm can sprays better (soak in warm water b4 use) Warning NOT boiling water, then u have a potential bomb in ur hands.
• Really shake the hell out of the can especially for heavier pigments like fluorescents, continue shaking too while painting, this would ensure less sputtering of paint.
• Spray farther away. This will get a thinner spray of paint onto your lure. Use multiple thin coats instead of one thick coat up close. I sometimes even shoot from even 1 to 2 ft away.
• You can spray wet on wet to get better blending. That means shoot the 2nd color b4 the 1st coat has dried. The colors will blend together and sometimes u get a third color from it. Eg, Candy blue & blend with candy yellow will give u green blend where the 2 colors meet. Works best with transparent colors.
• Use cardboard to shade ur painting and angle the spray away from edge of cardboard to get a faint parting line; 90° to card will give more apparent lines. Distance of card from painted surface will control how far the blend is going to go into card shaded part. Shooting at an angle into the space btw card & lure will give u a big mess LOL.
• Starting the spray b4 the lure and smooth sweep ending away from the lure will give you a more even coat

Hope this helps.
PS: I'm usually on "there other side" but do lurk here too

[BigFish]

I hold the plug with one hand and spray with the other....no problems what so ever! More control over the process in my opinion!