I want to put a some underwater lighting on-board but...there is a big range of options and prices. Power drain is an issue for me so I want to go with LED's. The Ocean LED lights look great but cost big bucks.
I inquired about one and it was $1600 each! not including installation.
I want 4...two facing aft and two facing down (possibly with strobe feature!)
Have any of you installed underwater lights on your boat?
How do you like them?
Last edited by Mr. Sandman; 03-18-2010 at 12:41 PM..
QUESTION (as I just had the thought): if you want red why not hang/use a pair of LED, submersible trailer lights?. Much cheaper to experiment? How much water depth would the light need to penetrate and does the color red do anything?
Given the diversity of the human species, there is no “normal” human genome sequence. We are all mutants.
Red light gets absorbed the quickest. Violet the longest. (in seawater). I don't want to hang anything overboard.
Most of the colors are white, blue and green. I don't think I have seen a red light.
When the rooster tail is blue underway, it looks really cool.
LED's give a lot of light (lumens) for the amperage. Was probably going to go green and/or blue But at a grand a pop I might do it in stages over time.
Nico Michiels, a researcher at the University of Tubingen in Germany and his team have discovered 32 different species of reef fish who emit flourescent red light.
Their research has found that the fishes' skin contains guanine crystals which causes the flourescence. Michels is speculating that the glowing red colors may be used for advanced communication between and among fish species. His next task will be to prove that fish do indeed see light on the red spectrum, which appears more and more likely.
Lights are cool to look at and when in the canyons on the chunk at night draw alot of squid and small baitfish to the boat. They definitely help in that aspect. They proobably would do the same around here i.e. attract bait. Those coastal lights are very good and I know a few who have them and they have been flawless. I am just leery of having "extra" holes in the hull of my boat. Make sure you epoxy and glass them in and have wooden dowels that can be jammed into hull if it ever ruptures. Also make sure the bilge is capable of pumping out the amount of water that enter from those holes. I personally never have heard of any lights letting go but.......
If it were me when choosing anything below the water it must be bronze thruhull (nice heavy casting) and relatively flush. Those coastal ones looked like white plastic.
If it were me when choosing anything below the water it must be bronze thruhull (nice heavy casting) and relatively flush. Those coastal ones looked like white plastic.
The heavy bronze thru hull ones that can be pounded with a hammer and not break cost about a grand a piece. They generally require a large hole to be drilled in the transom. The surface mounted ones usually don't require much of a hole (some can be done without any hole) and they are as cheap as 50 bucks.
My research is showing that you get what you pay for. Ocean LED is the way to go. There are a couple others too (abyss, etc) Really bright very solid and efficient but costly. I will try to add 2 by the end of the season. Lots of other more important stuff first.
Most surface mounted stuff below the water line, on trim tabs or swim platforms will generally rip off and you will see it water skiing behind the boat some night being towed by its own wire.
Is the bilge area easily accessible if you choose to go thru hull? Cored Hull or just glass? Like you said it looks like you get what you pay for......Now mounted to or thru an external trim tab is an idea if you don't want to cut holes....
We've got the Coastals.With the wire thru the top of the housing,we used 5200 to mount them under the swim platform,and ran the wires in through the scuppers.They work pretty great,attract fish,and we didn't drill any holes.
Oh yeah,get the long/wide/doubles.Our only regret is that more light would be good.
We've got the Coastals.With the wire thru the top of the housing,we used 5200 to mount them under the swim platform,and ran the wires in through the scuppers.They work pretty great,attract fish,and we didn't drill any holes.
Oh yeah,get the long/wide/doubles.Our only regret is that more light would be good.
Is Coastal the brand or model? Any links to share?
“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
Seablaze 3 underwater led lights... www.lumiteclighting.com
This is the way to go, friend has these, it's what I would get... Posted from my iPhone/Mobile device
I may wait until next season. The price is coming down as more and more competitors enter the underwater light sector. I want something fairly powerful, I don't want to go thru the effort only to see a weak glow back there.
There is such a wide range of product. I think a heavy duty surface mount light would be OK for a transom mount in a protected area (under a swim platform) but I would not want it facing down. Guys screw all kinds of stuff on the transoms (transducers, tabs, etc) no reason why lights would not be ok.
I have a full transom bracket off my 24' romarine. There are two lights I got from the factory of the bracket. The bracket rocks!!!! the lights suck. you practically have to put your head underwater to see if they are even on!
They were an option and I went for it at the time of install.
I have seen Animals coastal lights in the parking lot and they kick off SOME light. If I had to do it over again, I'd go the coastal way with 5200 and somehow snake the wires up through the rigging for the OB and up to the console that way.
Who knows, that could be a project this summer.
One does get what one pays for though.
I just didn't pay enough or research it enough.
- ATG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AT Grimaldi
RISAA Member
Ron Arra Lami 1083 biggot!
Penn 4500 SS w/ 14# chart. FireLine
Ron Arra Lami 1083 custom
Abu Garcia C3 6500 Rocket
Hopelessly addicted custom wood addict. Working 2nd Step.
i just got two flush mount lights ,blue.. they have six led's in each,wow are they bright,3" round 3/4 high they feel like they weigh a couple of pounds each. h2o lights is the name of the co.and i got them because they were cheap, if they don't work i'm out 200, on a sunny day they were hard to look at,there so bright
i just got two flush mount lights ,blue.. they have six led's in each,wow are they bright,3" round 3/4 high they feel like they weigh a couple of pounds each. h2o lights is the name of the co.and i got them because they were cheap, if they don't work i'm out 200, on a sunny day they were hard to look at,there so bright