That was the first time I've done that with the iphone. I'll flip it sideways next time so the video comes out better. I'll be running these for the next week every day.
I count about 17-18 seconds each. Out of the 17 to 18 , the tool is actually cutting wood for about 12 seconds so 5 to 6 seconds to swap pieces.
I did piece work on a lathe for summer and winter vacations in college (United Steel Workers Union) . probably 20 weeks a year total. Some jobs took some skill and were fun. Some were just cranking pieces in and out mindlessly. Worst job was these long ID bores on wire spools. With the big flanges on the ends of the wire spools , you have to open and close the chuck about 8 inches in each direction. You spent more time cranking the chuck wrench than you did cutting steel. I had to do about 30 an hour to make top money so you were cranking like hell all day. compare that to truing up the stamped center holes on big 4 foot dieameter spool ends. the lathe had about a 6 foot swing and it was a 4 jaw. The pieces were so big I had to load them into the chuck using and overhead chain fall. With the 4 jaw you had to true everything up each piece. The rate on that was 4 per hour and 6/hr was the top bonus rate. All this work had to be fairly precise and the finished wire spools were high speed balanced just like when you get new tires. The balance weights were tacked on with a tiny welder.
I did piece work on a lathe for summer and winter vacations in college (United Steel Workers Union) . probably 20 weeks a year total. Some jobs took some skill and were fun. Some were just cranking pieces in and out mindlessly. Worst job was these long ID bores on wire spools. With the big flanges on the ends of the wire spools , you have to open and close the chuck about 8 inches in each direction. You spent more time cranking the chuck wrench than you did cutting steel. I had to do about 30 an hour to make top money so you were cranking like hell all day. compare that to truing up the stamped center holes on big 4 foot dieameter spool ends. the lathe had about a 6 foot swing and it was a 4 jaw. The pieces were so big I had to load them into the chuck using and overhead chain fall. With the 4 jaw you had to true everything up each piece. The rate on that was 4 per hour and 6/hr was the top bonus rate. All this work had to be fairly precise and the finished wire spools were high speed balanced just like when you get new tires. The balance weights were tacked on with a tiny welder.
wow you make it sound so interesting
"A beach is a place where a man can feel he's the only soul in the world that's real"
bout right Saltheart. I think the program time is about 11-12 seconds. Those still have to be sanded but only a 150 touchup so you can really move on those.
I could never show the darter machine online. I don't even show 99% of the people who come in my shop. Some things I hold tight and that's one of them. Too much time and money into this.
Originally Posted by #^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&
I could never show the darter machine online. I don't even show 99% of the people who come in my shop. Some things I hold tight and that's one of them. Too much time and money into this.
I'd show ya, but I'd have to kill ya
"The lips stand out because she wants to suck on your Pikie."....Mike Laptew Van Staal Service/Repair Technician
Blond Terror
Given the diversity of the human species, there is no “normal” human genome sequence. We are all mutants.
"The lips stand out because she wants to suck on your Pikie."....Mike Laptew
Hybrid Mode
