Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Today's Posts Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Main Forum » Boat Fishing & Boating

Boat Fishing & Boating A new forum at Striped-Bass.com for those fishing from boats and for boating in general

Reply
 
Thread Tools Display Modes
Old 04-11-2006, 07:04 AM   #1
LT. DAN 2
Registered User
iTrader: (0)
 
LT. DAN 2's Avatar
 
Join Date: Apr 2002
Location: Lakeville,Ma
Posts: 203
Help on Hydraulic Steering Question

I have a 24 ft. Leguna powered by a 250 Merc (1996) outboard.

I noticed last time out that my hydraulic steering seemed to slip once or twice on the return trip to base. When turning the wheel, it almost seemed to slip an inch or so before it grabbed again. The fluid level was full and am wondering:
1. Could it be an early sign of the pump going?
2. If I lose the pump would the steering be possible but very stiff but managable to get back to port. (Like an auto power steering problem)
Appreciate any thoughts and recommendations...

LT
LT. DAN 2 is offline   Reply With Quote
Old 04-11-2006, 07:10 AM   #2
MakoMike
Registered User
iTrader: (0)
 
MakoMike's Avatar
 
Join Date: Feb 2003
Location: Newtown, CT
Posts: 5,659
If you loose the pump you won't have any steering. what do you mean by "slip" the reel has no resistance and then it pick up resistance again?

****MakoMike****

Http://www.Makomania.net

Official S-B Sponsor
MakoMike is offline   Reply With Quote
Old 04-11-2006, 07:56 AM   #3
beamie
Registered User
iTrader: (0)
 
beamie's Avatar
 
Join Date: Mar 2004
Location: Marshfield, MA
Posts: 1,748
Lt.

My set up is for an inboard and different....and I'm not sure what manufacture it is since it is steel and unreadable......but,

although your level looks good there could be a bit of air (the most common problem for sluggishness) in the hoses. I have a needle valve at the working end that lets me rotate the pump "wheel" continuosuly to remove any air and fill when the level drops, you may not have that luxury.

If you do have that option and wanted to flush "clean" your system to maybe free up a ball check you can do this with a bit of diesel "(thin hydraulic oil)" and then refill with hydraulic oil.

Is your piston shaft still straight and not sticking?

Hope you make out OK.

Jon, 24' Nauset-Green Topsides, Beamie, North River. Channel 68/69. MSBA, NIBA
beamie is offline   Reply With Quote
Old 04-11-2006, 04:31 PM   #4
LT. DAN 2
Registered User
iTrader: (0)
 
LT. DAN 2's Avatar
 
Join Date: Apr 2002
Location: Lakeville,Ma
Posts: 203
Mako Mike,

It actually had resistance, then no resistance for maybe a 2" turn of the wheel..., then seemed to grab resistance again. I tried it again today and it seemed O.k. so I'll watch it. I thought worse case scenario I could at least limp back to the dock but you say that's not the case? Thank-You for the heads up.

Beamie,
Thank-You for your suggestion..I may have to use it in the near future.

LT
LT. DAN 2 is offline   Reply With Quote
Old 04-11-2006, 04:36 PM   #5
thefishingfreak
"Fishbucket"
iTrader: (1)
 
thefishingfreak's Avatar
 
Join Date: Feb 2004
Location: Bahston Hahbah
Posts: 6,588
mine used to do that when it was cold.
i ignored it and it went away

you can bleed those to see if there's air in it.. fill the wheel and bleed from the back.
takes two guys..

thefishingfreak is offline   Reply With Quote
Old 04-12-2006, 07:00 AM   #6
MakoMike
Registered User
iTrader: (0)
 
MakoMike's Avatar
 
Join Date: Feb 2003
Location: Newtown, CT
Posts: 5,659
LTD,
I would try bleeding it. It sounds like you might have a little air in it.

****MakoMike****

Http://www.Makomania.net

Official S-B Sponsor
MakoMike is offline   Reply With Quote
Old 04-14-2006, 11:21 PM   #7
ScottC
Registered User
 
Join Date: Apr 2006
Location: Fall River Mass
Posts: 238
Sounds like air, see if you can bleed the helm too.
ScottC is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:48 AM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com