|
 |
|
|
|
 |
|
 |
|
Boat Fishing & Boating A new forum at Striped-Bass.com for those fishing from boats and for boating in general |
 |
09-02-2007, 05:50 PM
|
#1
|
Registered User
Join Date: Jul 2005
Location: Plymouth, MA
Posts: 193
|
question about my aerator???
I am building a portable bait-well for my boat, and thought it was done, but it won't suck water in. I tood a 32 gallon drum, mounted a bilge pump in the bottom with a hose leading out, and mounted an aerator near the top of the drum. The aerator mounted near the top has a hose running into the outside water. I have them on two separate switches for filling and draining, and both will turn on, so I know the connections are good. Like I said, it just won't suck the water in. I hope I have explained this well enough for anyone to get a mental picture, but I guess my question is this: Did I understand the directions right? This aerator should be able to suck water in from one hole and disperse it out the other hole, which is why i mounted it so one hole is in the drum and the other is outside the drum. Any advice will be greatly appreciated. 
|
21' Sea Pro WA
|
|
|
09-02-2007, 06:29 PM
|
#2
|
"Fishbucket"
Join Date: Feb 2004
Location: Bahston Hahbah
Posts: 6,588
|
the aerator probably doesn't self prime or suck water from any distance.
|
|
|
|
09-03-2007, 07:51 AM
|
#3
|
stripadan
Join Date: Feb 2006
Location: wareham
Posts: 101
|
Aerating bait isn't worth the hassle, you want a continuous supply of fresh water.
I found the best way for my boat is to have a bait pump on a bracket on the transom permanently. Mount a shut-off and quick connect on top of the transom, and let the overflow hang overboard. The pump will force feed when running if you want to limit power draw. You can also hook-up a washdown hose to the quick connect.
I see you're in Wareham, me too. pm me if you want and i can take a look, or you can check my set-up for ideas. I've set up both of my boats and two friends the same way. Never had a problem keeping any bait alive, herring, mackeral, or pogies.
|
|
|
|
09-03-2007, 12:26 PM
|
#4
|
zoom
Join Date: Apr 2002
Location: Quincy
Posts: 4,145
|
If a pump is mounted above the water line, it has to be self priming and be able to pull up to the distance (height) you have it mounted.
If you have a thru hull its the way to go, just mount the pump on it and have the hose with a shut-off. Overflow pipe for the tank.
Water in the bottom and out the top and over the side.
Hope that helps.
|
~..~..~.. ><((((º>
Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.
|
|
|
09-15-2007, 02:08 PM
|
#5
|
Registered User
Join Date: Jul 2005
Location: Plymouth, MA
Posts: 193
|
thanks.
Thanks guys, but i figured out my problem. The aerator just didn't have enough to suck the water up. I have decided to go bilge pump in and bilge pump out. I figure this way, I can fill it, drain it, and also have a constant exchange of water when sitting. Thanks again for the advice, much appreciated.......good luck guys.
|
21' Sea Pro WA
|
|
|
 |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:37 AM.
|
| |