Quote:
Originally Posted by ProfessorM
A lot less than that I have found. I epoxy seal my med. size darters, for several reasons, cause I make them out of AYC and I have found nary any weight gain at all. I usually do 2 coats of clear coat epoxy on all my plugs for a top coat nowadays, cause I can as I do pretty small batches, and I have never found any problem with the way they perform with the added coats. I do thin coats though as clear coat runs thinner than e tex. If you gobbed the stuff on you would probably have some weight gain. Just my findings others may disagree.
|
I agree with your opinon Paul. I DONT GOOP IT ON LIKE I used too.
Posted from my iPhone/Mobile device
Threaded Mode