|
Don't know if I have the same idea as BigFish or not but... My GMC bed has slots to lay a 2x6 horizontally in the back of the bed a little over a foot high. 1 PT 2x6 across the bed bun geed down to factory eye bolts in back corners of bed. Cut 1 1/2 PVC into rod holders and screwed them to the bottom of the 2x6 at a slight up angle (wood spacer across the 2x6). Add as many as you want. Two eye bolts at either end of 2x6 for bun gees and cable I use to lock reels to the hole contraption. As BigFish said, can be had for under $15. Will try to take a picture tomorrow. I got the idea from someone here who posted pictures of a similar rack made of plywood.
|
Threaded Mode