Quote:
Originally Posted by TheSpecialist
Either glassing in what I cut out, and raising the deck under the footprint of the leaning post to fit the fuel fill on the new tank, or cutting the whole deck out and raising the whole thing. I want to go the easiest, least expensive, or practical route as I plan on getting a new boat in 3-5 years,...
|
Cut the top skin off in sections, replace rotted plywood or end grain balsa core with epoxy impregnated plywood. Bed with epoxy + fibers and put coarse thread screws through plywood and inner skin to pull together and let dry then remove screws, fill holes, attach deck back on with 3" wide strips of glass after filling in the gap.
Wash, rinse, repeat.
Threaded Mode