Quote:
Originally Posted by Mr. Sandman
I have a flush fishbox drain almost like an offset thru hull and it would work great except to get it in on the angle I want to would require a big cut out and repair. I think a plumbing pipe with a hose barb would would great then I could use a hole saw and rill out the hole, insert the pvc on the angle I want, epoxy it in and cut it flush against the bulkhead with a multi-tool.
I am going to resolve clogged drains and pumps right here and now...I just hope my watch does not fall off in the fishbox because this thing will chew it up and spit it out.
|
Rough up the fitting (sand) then wash with acetone and use this stuff, won't have a problem.
Six10 Thickened Epoxy Adhesive
Threaded Mode