|
Well I system 3 10 plugs first coat. Hung them with 2 heat lamps c lose by. They are already touchable . 9 hrs. Did 1 pike with KBS. 2 coats. 6 hr between. First coat was dry to touch , very little tack. Second coat covered a y voids and gave it a deeper finish. Also did a few bats while I had it out. Punched a small hole in b otto and resealed sith screw, the left over fi is will solidify around the hole helping to seal out air,. This stuff hardens with the co er on. They sell a b "burp" spray to replace e air in a i.le. argon. Nice t n I g with small hole you squeeze out just enough. Never used the screw method , (thanks J). Always repacked in a Mason jar and vacuum pa ked it. Real PIA. I'll keep post results of plug fi is and pot life in can.
|
Threaded Mode