|
Well removed the nut on the starboard side, turned the wheel and the shaft came out as far as the wheel would turn, about 10". The part of the shaft that the motor attaches too, has a flat milled on it and a thru hole for bolt to attach to motor via linkage did not move. Is there a shaft inside a shaft inside the tube? I banged on the what seems like the shaft inside the tube, the part the motor attaches to, and it did budge a little, pushing inside the tube. I need to get this thing out I assume. Lots of cruded up grease inside there. Do I continue to bang that end all the way out of the tube? P.
|
Threaded Mode