|
By calipers I mean simple mechanical ones. You will set one for your tail size, one for your head size (on swimmers) and one for the widest spot on the plug (maybe a fourth for some other area on the plug).
You will turn a cylinder with your gouge, then use your parting tool and calipers to set the 3 or 4 crucial dimensions. You will rough down close to final shape with your gouge, connect the dots with your skew, touch up with sandpaper, and start another body.
I think a 1 1/4 " skew is easier to use than a 3/4 " one, a 3/4 " roughing gouge is a good tool, although I use a 1 1/2" gouge more often (both work and the 3/4 better for final roughing). Get a simple square sided parting tool, it is better for flat ends and faster (more stable on the tool rest than the narrower diamond tool) unless you need a thin profile for detail work.
A duplicator is a mixed blessing.
|
Threaded Mode