I hope someone will rescue my spook building as I'm not sure where to go next.
I spent a lot of time over Thanksgiving break reading all the past posts here regarding spook building, Jig mans post was especially helpful.
I cut some blanks and weighted them and the sat in the water level about where I wanted them (I thought), approx. 10-15 degrees tail down. I don't have a current pic, but I cut the blank the same specs as my swimmers (pic attached) 6 inches long, cut from pine, 1/2 oz wieght 2inches in from the tail, the hook position is the same as the pic and I tried both line tie centered and below the center line. I used 5/0 trebles, weight total 2 3/8 oz.
It sits in the water nicely, but on the jerk it won't glide, it just bounces. I'm looking for a nice, wide surface glide. Did I weight it too much and that is why it keeps bouncing? I didn't drill out the lead yet (forgot the drill) it's in the low thirties today and testing was brutal with 25 plus MPH winds, so back to the shop frustrated.
How should I break down the next step? Drill the weight out and see if less weight will be better? Should I move the towards the head more?
Here is a pic of the lure shape and body style.
Thanks in advance guys for any pointers,
MS
Threaded Mode