Quote:
Originally Posted by 5/0
These PICS are two years old and the units were less than a year old at the time I took the pics.I had hope to post them earlier when O.D.Mike asked about cleaning the coils.
The unit on the left had a blanket of filth on three sides this is after only one year of operation....The one on the right had some but not as bad......It was weird to find it this way,there was nothing to indicate what the cause was, no drier vent,work shop vent or a exhaust fan.within 20' just odd.
Anyway this is the crap I was describing this will degrade the SEER rating and if not cleaned,over time it will cause damage so here are some before and afters.
|
5/0, it looks like the fan was put on backwards. The airflow is reversed.
Threaded Mode