|
Sounds like you've got something that does what you want, so go with it but for future reference a few thoughts.
A standard surface swimmer is weighted to float level with the water line @ 1/2 way up the plug. I purposely build them heavier to get them working slower, but there is a tradeoff in that they tend to get subsurface easier than I'd want.
A standard lip size would have the angle at or a slight amount below the chin of the plug. The further you drop it the more roll (and depth) you get.
The standard lip for a surface swimmer is a mid-slot lip. In your picture it looks like you are using a high slot lip (and pikie lips are all high slot). This can be made to work if the plug is very fat and buoyant and you want a lip to pull the nose down and put the tail up with a fast wag (think surfster) but usually high slots are used to take a plug down and make it stable.
Just as an experiment you might try the same shape with a lefty 1 mid slot (or pikie 2 with a lower hole punched in it), and less belly weight. It would also allow you to use 3/0 or 6x 2/0 hooks.
Another thing to watch out for when testing plugs at this time of year is how high above the water your rod tip is. We tend to test from docks and jetties and the higher rod position often keeps a plug running higher than you get when you fish lower so be sure to drop your rod tip during the retrieve and see what occurs.
Whatever, the first big fish you hit with it will make it all worthwhile.
|
Threaded Mode