|
Stick a doubled over index card in your lip slot and pull it out after the plug has spun for 30" or so.
All that waiting a week, then another week, then another week is because Paul is a procrastinator.....it has nothing to do with end results.
With valoil I sand and prime after 24-48 hours in a heated room.
With Zspar undercoat, I sand and finish paint after 24-48 hours in a heated room. As long as your seal coat or prime coat dust as you sand and don't clog the sandpaper you are OK.
I let the createx dry over night then heat set it in a warm oven for 15-20" and epoxy soon thereafter.
I belly grommet/eyes before epoxy. Everything else after.
|
Threaded Mode