|
Goose....dang puter crapped out so no pic right now.....picture this..
take some 2" pvc pipe
cut into 1 1/4 wide pcs. like ring's
cut out 1/3 of the ring or whatever thickness u need to slide the rod into. so it looks like a C
drill 1 ,,,,,3/8" hole in the bottom of the C...now drill a hole in the top big enough for a screw.
the bottom hole will allow you to put a screwdriver and screw through..
screw this C to whatever you want to hang your rods from..put up as many as you need to hold the rods from sagging.
my ceiling down stairs have many of these C's..enough for 32 rod's of all sizes.
|
Threaded Mode