|
It may not make much difference on the larger plugs, but I know with some of the smaller freshie stuff I do, it can make a difference. If the epoxy sags on one side, that will effect the action. Again, thats on smaller plugs. I've found there is less room for error with weight and stuff on the smaller plugs. Will also depend on the type of clear coat. Devcon sets up pretty quick, so it may not be as necessary. For something like systems three, it takes a lot longer to set up. I have better things to do (like turn more plugs or pour some lead) than have to worry about flipping the plugs every 10 minutes or so for a couple of hours.
Jigman
|
Threaded Mode