Quote:
|
Originally Posted by rwilhelm
I have a 560 Slammer and when I first used the reel I really liked it. Was very smooth and seemed to have a good drag. Maybe it is just me but whenever I dunk this reel, the drag is almost non-existant. One thing I think would have been a good idea is to have put a bronze main gear on the slammer instead of whatever that metal is on there now. I broke a couple of teeth on the main gear this past season.
|
Not sure why the drag would disappate when dunked, as you should have a sealed drag knob, and with the drag under-the-spool, there is much less chance for water to intrude. Check to see if the drab knob has a small gasket, if not, I would recommend picking up another one from your local Penn Dealer or call our Parts department. If you have the gasket, I'd then check to make sure the drag plate is screwed down. Other than that, I don't have an answer.
I guess I should also find out, are you wetsuiting with the reel, or is this an occassional wave breaking over you that is causing this to occur. If wetsuiting, I would recommend a drag lube that will help keep water from instruding. I would also disassemble the reel after each trip, and rebuild, as the Slammer is not a water proof reel like the Van Staal.
As far as the main gear, I believe it is a hardened naval bronze, so I am not sure why there would be any problems. Without seeing the reel, or the condition is was in, I am working blind, so I won't try to guess what the issue might be. Has this been repaired already? If not, I would love to have it sent to me for evaluation.
Feel free to get back to me at your convenience.
BK
Threaded Mode