close captioned for the herring impared

[gone fishin]

Eben - nice job! Especially with rattle cans. You will really enjoy a airbrush.

[Striperhound]

MUM'S THE WORD EBEN

[NIB]

Nice plug johnny hardware.
I have one similar to that u made just a tad larger.
Stop usin splitrings,cut the hooks.
the back split ring on the first plug is spread some already.If that rides up on the swivel u'll be cryin.
Why enviro I like the other finish.
No eyes on a danny.
Thank you.
Z wakin a plug on top can be achieved with many different styles. Just a matter of how u make em.
One Mans danny is another mans A-40.
With a little fine tinning he can tro that plug in a breachway.

[NIB]

Actually i use em in the opposite fashion the A Jr.s I have from a old BEach master run are on the heavy side an I like to tro em in the white stuff more than the flat water. the round nose aids the plugs action.IMO.Plus they go nice wit a skin on em.

[Nebe]

HEY TONY BALLONY

the split ring that looks like it is opening was hung up on the swivil.. I put the hooks on about 15 seconds before i took those pics and didnt notice that i had a hanger..

I used E-tex because i have some left over from my pre sspraying days, but i blew up my air compressor.. threw out a bearing or something.. so i couldnt spray. man what a pain in the butt brushing that stuff on after you are used to spraying.

I went down to a ripping outflow yesterday to swim one in some moving water. In calm water it came in right on top with a big v-wake like a motor boat.. in the rip it came in about 4 inches under and still made a V-wake like a submarine.. Didnt pop out at all and the action is all wiggle, no rolling.

I really like this red cedar for swimmers, its nasty stuff to turn, but its so bouyant.. perfect for plugs you want to stay on the surface.

[Zeno]

[QUOTE=NIB]=
No eyes on a danny.
Thank you.
=QUOTE]

Because ?

[NIB]

Originally Posted by Nebe

HEY TONY BALLONY

the split ring that looks like it is opening was hung up on the swivil.. I put the hooks on about 15 seconds before i took those pics and didnt notice that i had a hanger..

I used E-tex because i have some left over from my pre sspraying days, but i blew up my air compressor.. threw out a bearing or something.. so i couldnt spray. man what a pain in the butt brushing that stuff on after you are used to spraying.

I went down to a ripping outflow yesterday to swim one in some moving water. In calm water it came in right on top with a big v-wake like a motor boat.. in the rip it came in about 4 inches under and still made a V-wake like a submarine.. Didnt pop out at all and the action is all wiggle, no rolling.

I really like this red cedar for swimmers, its nasty stuff to turn, but its so bouyant.. perfect for plugs you want to stay on the surface.

Sorry if I have a eagle eye.
Too bad bout the Kompressor.Welcome to the crap world of epoxy.
Instead of Val oil try heating a ready to prime blank up 10 mins at 200. an coat wit epoxy.pour in the holes an use a pipe cleaner to service the insides.Keep applyin til it don't soak no more.wipe off the excess an let dry then prime an paint.Makes a nearly indestructo plug.
I really like red cedar also for swimability.u can always weight to suit.
its soft so u gotta whatch what ur doin.I hurd basswood is very nice i got a good chunk I have to decide what to do wit it. good to see u goin full bore.Keep up the good work.Call me if u want me to send u my smilin bill molds.

[Nebe]

Originally Posted by NIB

Call me if u want me to send u my smilin bill molds.

ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh Darn tootin i will

[NIB]

[QUOTE=Zeno]

Originally Posted by NIB

=
No eyes on a danny.
Thank you.
=QUOTE]

Because ?

The Ledgend Dave Manzi brought this to my attention a few yrs ago an I agree hole heartedly.a Danny's Inherrent action is a tantalizing slight sub surface snakelike movement.Incorperated in that movement is some roll.No good, better fish i believe are turned off by this.the way to off set it is to paint em in solid colors or make the blends from one color to the next soft.no hard two tones like dark blue to white.the other giveaway is eyes.them eyeballs rotating top to bottom make me dizzy.i love dannys an probably caught more fish on that style plug than any other wood.Without eyes.There's a beauty in it's simplicity.I'm convinced they (eyes) really don't matter.if i do use em on metal lips they will match the paint scheme an kinda blend in..Then again I do have a big one 3.75 onces light yello an white.wit big red eys.only gets play in big water.caught lots o fish but it get used differently.Kinda like a rest an retrieve thing.In my mind the red eyes on the yellow gives em a better target.So it all depends.On needles in the dark of night i like eyes.I usta put them plastic eyes on my gibbs needles yrs ago I liked the bump out.I have quite a few older ones witout eyes that have worked well in the past but get no play anymore.Go figure.

[NIB]

Originally Posted by Nebe

ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh Darn tootin i will

I Posted that in ur tire weight thread but i guess u didn't see it.My molds take special hooks.If i go to plugfest i will swing by if u don't go.An go over it wit ya.

[Nebe]

NIB i'll call y ain a bit...

as for eyes, i wont pu t them in now if i only use one hook on the belly as the plug will roll more- my dannies with two hooks wiggle like a bastid, so the eyes are not distracting and like you say, make a target- thats also why i put the plack dots behind the eyes..

[Zeno]

interesting concept....but I don't agree with any of it
unless you can prove to me that you can talk to fish and they tell you that eyes makes them woozy ...its hearsay.give me the most realistic copy of a baitfish ....I have not yet seen the one with no eyes swim around
as far as the colors scheme ... maybe,sometimes,occasionally ...basically ,like all other concept ...

[NIB]

Originally Posted by Zeno

interesting concept....but I don't agree with any of it
unless you can prove to me that you can talk to fish and they tell you that eyes makes them woozy ...its hearsay.give me the most realistic copy of a baitfish ....I have not yet seen the one with no eyes swim around
as far as the colors scheme ... maybe,sometimes,occasionally ...basically ,like all other concept ...

I could bring u to the water an tell u what they say but u wouldn't believe that either.
to each thier own.
Its not hearsay to me.
What?

[Slipknot]

beachmasters used to work just fine with no eyes




having said that, I have dannys with eyes and without

[Nebe]

beachmasters dont wobble... if your plug wobbles, you gotta paint it a solid color so there are no details to show the wobble..


another thing is that the bass are attacking the plug from below most of the time and probably dont see the eyes.

needlefish on the other hand really need eyes IMO>..

[Slipknot]

Originally Posted by Nebe

needlefish on the other hand really need eyes IMO>..

not really
I fish lots of needles
and blind ones catch too
I can see that when the bass are picky and there is not complete darkness. I never fish needles in the daytime unless I am on my boat in a certain harbor mimicking sandeels fished fast.

[Nebe]

true bruce. i guess what i ma saying is any plug that can be presented at eye level to the bass might fare better with eyes.

[Tagger]

needles catch bass under a bright sunny sky too . Took a kid that didn't know what he was doing to prove it to me .

[Nebe]

great Pic tagger