|
Useing that motor/set up is the way I wrap all my rods. I've done well over 100 and I can't see doing them any other way. You'll need that aluminum sleeve, it has two small allen keys and you'll also need the chuck. First you set the height of your rollers then center your motor to that height. In this pic of my old set-up I used wood it was solid , the setup I have now I bolted the motor on a peice of L shaped steel (bought @ homepot) I then screwed the L bracket to the wall. I also saved the wire setup from the old sewing machine. You can find any missing items at sewing machine repair shops. With little pratice thread FLY's off spools, you'll see.
|
Threaded Mode