| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
04-13-2006, 08:37 AM
|
#1
|
|
Canceled
Join Date: Jun 2003
Location: vt
Posts: 13,435
|
I do it on the bandsaw against the fence before I cut the square ends off the blank. That won't work with dowels, then you'll need to use a vblock.
|
Frasier: Niles, I’ve just had the most marvelous idea for a website! People will post their opinions, cheeky bon mots, and insights, and others will reply in kind!
Niles: You have met “people”, haven’t you?
Lets Go Darwin
|
|
|
|
04-13-2006, 11:03 AM
|
#2
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
I do all my lip slots, face and body angles, with the same fixture. Everything is taken off the belly holes, which I do first. Fixture can be slide along the fence in the band saw. It can also be used with the miter gauge to do face and body angles and angle lip slots too. Can be used with the belt sander for the body angles too. I have 2 different size pins that fit into the fixture and the 2 belly holes sizes I use. I also have jack screws in the rear of the fixture to adjust the plug so it sits level and to keep it straight. Alum. is nice and heavy which helps also. Could be made out of wood. P.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
04-13-2006, 01:42 PM
|
#3
|
|
Registered User
Join Date: Jan 2003
Location: Hard aground
Posts: 1,362
|
Quote:
|
Originally Posted by Professor Moriarty
I do all my lip slots, face and body angles, with the same fixture. Everything is taken off the belly holes, which I do first. Fixture can be slide along the fence in the band saw. It can also be used with the miter gauge to do face and body angles and angle lip slots too. Can be used with the belt sander for the body angles too. I have 2 different size pins that fit into the fixture and the 2 belly holes sizes I use. I also have jack screws in the rear of the fixture to adjust the plug so it sits level and to keep it straight. Alum. is nice and heavy which helps also. Could be made out of wood. P.
|
That thing looks to be out about 1/75,000 there bub.  |
 Plugs Rule 
|
|
|
|
|
04-13-2006, 03:48 PM
|
#4
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
I knew you couldn't resist. A little overkill but what the hell if you got the stock and machines you might as well use them. Might work on those angles you make. Any fish yet?
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
04-13-2006, 04:23 PM
|
#5
|
|
Salt of the Earth
Join Date: Nov 2002
Location: Suburbia, RI
Posts: 1,025
|
im much more hack than you pm. i got the stock and the machines too, but no time for the gov't work.........all work and no play 
my fence is a straight piece of wood clamped to the table, at the desired angle. the stop is a clamp to keep the jig from going too deep. |
|
|
|
|
|
|
04-13-2006, 04:25 PM
|
#6
|
|
Registered User
Join Date: Jan 2003
Location: Hard aground
Posts: 1,362
|
Quote:
|
Originally Posted by Professor Moriarty
I knew you couldn't resist. A little overkill but what the hell if you got the stock and machines you might as well use them. Might work on those angles you make. Any fish yet?
|
Yer starten to figure me out I gotta change tactics 
2 busy 2 check, I was gonna go this weekend but I will b away. Maybe Sunday. |
Plugs Rule
|
|
|
|
|
04-13-2006, 04:35 PM
|
#7
|
|
Salt of the Earth
Join Date: Nov 2002
Location: Suburbia, RI
Posts: 1,025
|
Quote:
|
Originally Posted by Professor Moriarty
Any fish yet?
|
yes  |
|
|
|
|
|
|
04-13-2006, 07:54 PM
|
#8
|
|
Registered Grandpa
Join Date: Nov 2003
Location: east coast
Posts: 8,592
|
Professor M, i can see how you can get your belly holes centered and square if you leave the square ends on before drilling , but if you use Profeesor T's hydro oriented method, and remove the squares, how are you holding the plug to get the belly holes centered then.  |
" Choose Life "
|
|
|
|
|
04-14-2006, 09:57 AM
|
#9
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Well Dave with a little math and a very expensive vise, oh yeah a Bridgeport helps  you can find the center of the plugs and drill away. Adjusting the handles for varying dia. I realize this is not something many people have laying around. I have been thinking of a way to use a drill press and vise to do a similar way. If all the plugs were of the same dia. then you could just set the vise and you would be on center but that would be too easy. I think maybe a fixture which would orientate the plug using the thru hole. Maybe a pin inserted into each end, adjustable for different length. The fixture would be mounted on drill press so the pin center line would be on center of the drill press spindle, then plug dia. would not matter. I will do some thinking on it. You could always just do it by eye with a hand drill  . Paul |
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
Rate This Thread |
 Hybrid Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:05 PM.
|
| |
