Quote:
|
Originally Posted by MAC
Here are a few different jigs I use to make life easier. first is the V block for drilling belly holes. Just center the block under your bit, set the depth (so you don't drill through). It is easier if it is thru drilled first as you can feel the drill bit when it hits the thru wire hole.
|
What if you used the same concept for thru drilling?
Fitted slide for the vblock then you just power up the drill and slide the vblock + plug forward.
The only issue would be height adjustment, but you could probably do that from the drill side? Or just shim the whole slide length with luan or something thin like that.
Threaded Mode