|
I've used their clear coat before. Good stuff. Like the other guys said, it can be temp fussy. Likes to be in 70-75 degrees while mixing/curing. Gotta make sure it is well mixed too. I found it best to mix it for a minute or two, get my plugs ready for clearing, mix again, pop a beer open, then a final mix before hitting the plugs. No problem coating 12 striper sized plugs and getting them on the spinner before it started to set up.
If you want to keep from driving yourself crazy with this stuff, pick a clear coat that you like and is easy to obtain. If your plug is any good, the clear will look like crap after a while anyway.
Jigman
|
Hybrid Mode
