| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
04-19-2009, 11:29 AM
|
#1
|
|
Calling Jon The Fisherman
Join Date: Jan 2003
Location: The Sack Of Mass
Posts: 2,357
|
Have you tested to see if it leaves a residue behind that might interfere with your clear coat? Seen that happen a few times and boy does it suck! 
-Dave |
Surf Asylum Lures, Custom Lures for the "Committed"
Official S-B Sponsor
|
|
|
|
04-19-2009, 11:56 AM
|
#2
|
|
Registered Papa
Join Date: Mar 2005
Location: "Da Cape"
Posts: 368
|
Won't the fish get used to the same pattern and know it is a plug?  Nice work and original too. |
Quote:
|
"If people concentrated on the really important things in life, there would be a shortage of fishing poles"
|
|
|
|
|
|
04-19-2009, 12:11 PM
|
#3
|
|
Registered User
Join Date: Nov 2007
Posts: 12,632
|
Quote:
Originally Posted by Canalman
Have you tested to see if it leaves a residue behind that might interfere with your clear coat? Seen that happen a few times and boy does it suck!
-Dave |
the one that I've finished is twirling now, no issues...no silicone in this product(latex, water, ammonia), and it's doesn't touch the plug while it is curing because it is covered w/tape, the ammonia could eat into a previous coat possibly but they don't come in contact when you are laying it out...I could see that a silicone product would definitely be a culprit if you stuck it on your plug in a similar manner, that stuff seems to leave residue even after it is cured.... I've used this latex for masking for years and never had any problem with adhesion over the masked areas and subsequent coats... |
|
|
|
|
|
|
04-20-2009, 01:15 PM
|
#4
|
|
Registered User
Join Date: Nov 2007
Posts: 12,632
|
finishing up
a couple of pics to finish up, remember if you want to try this to put a little powder on the latex before pulling it off of the plug so that it won't stick to itself, I might try Saran wrap to wrap the body instead of tape next time, in the pic I used the back end of an airbrush needle to spread the latex and lastly...the result...ready to fish! I also really need to thank George from Left Hook for the sweet Trophy Hunter bodies that he sent me to paint....
Last edited by scottw; 04-21-2009 at 01:15 PM..
|
|
|
|
|
|
|
04-21-2009, 08:36 PM
|
#5
|
|
Calling Jon The Fisherman
Join Date: Jan 2003
Location: The Sack Of Mass
Posts: 2,357
|
Quote:
Originally Posted by scottw
the one that I've finished is twirling now, no issues...no silicone in this product(latex, water, ammonia), and it's doesn't touch the plug while it is curing because it is covered w/tape, the ammonia could eat into a previous coat possibly but they don't come in contact when you are laying it out...I could see that a silicone product would definitely be a culprit if you stuck it on your plug in a similar manner, that stuff seems to leave residue even after it is cured.... I've used this latex for masking for years and never had any problem with adhesion over the masked areas and subsequent coats...
|
Excellent. Thanks. I may have to give this stuff a try. Awesome idea and I think that plug looks awesome. |
Surf Asylum Lures, Custom Lures for the "Committed"
Official S-B Sponsor
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
Rate This Thread |
 Hybrid Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 01:56 AM.
|
| |
