Is this the Place?

[wrikerjr]

Originally Posted by numbskull

Bah.........you have a ways to go yet.

You still need to glue the cards into the lip slot (plastic works best), forget to mix in the hardner when you coat a dozen plugs, get so much epoxy in the hook hole you can't get the turning rod out, have the spinner/shaft connection come loose so it all sags instead, and set the epoxy on fire while flaming bubbles.

Then there is the split your plug while wiring bit, split your plug while forcing in the belly weight bit, drill your hook hole through the darter slope trick, drill your hook holes on the wrong side of the plug, epoxy in the wrong lip, sand the diving slope on the wrong side, drill the wrong size eye holes, drill the wrong size grommet holes, and cut the lip slot too thick a kerf.

Then for paint there is the spray your plug with air brush cleaner thing, forget to clean between colors thing (love those pink bellies), bubble off the paint with the heat gun thing, and my very favorite the GIANT eye spot blot trick.

Ugh.

WOW - Thought it was only me. Another of my favorite is distilled water freexing whil painting plugs so you can't clean the airbrush and drop the airbrush reaking the needle and other parts of it, purchase new ones wait a week get them install and before you even spray it drop it again and have your wife just laugh (that was my weekend).