Prop spray question

[bassballer]

I havent. bought the boat in august.

[Van]

The motor could be mounted too high.

The cavitation plate should be at the same height (level) as the hull when they are parallel.

That is hard to change unless you can; and want to, unbolt the engine and move it down.

If all else fails, you could add the fin on top of cav plate, they do work.

[likwid]

Originally Posted by Van

The motor could be mounted too high.

The cavitation plate should be at the same height (level) as the hull when they are parallel.

That is hard to change unless you can; and want to, unbolt the engine and move it down.

If all else fails, you could add the fin on top of cav plate, they do work.

Which is a baseline, the cav plate on a plane should be riding right at the surface of the water.