Thick Lips

[Ryan560]

You could try taking a cold chisel and hammer and striking the original bends in a couple spots. Much like the commercially available pikie 4 lip. It will stiffen it up a bit.
Another option would be to source thicker gauge stainless at a scrapyard and bend your own lips.I bought a 3'x12"piece of stainless for $3 from my local scrapyard and bend them myself. Time consuming, but you get the lip you want.

[tlapinski]

Originally Posted by Ryan560

You could try taking a cold chisel and hammer and striking the original bends in a couple spots. Much like the commercially available pikie 4 lip. It will stiffen it up a bit.

I may try this first to see how it works out as it seems like the simplest solution. I don't mind it bending a little here and there, but I've had some lips come back bent almost parallel to the body.

[Charleston]

Originally Posted by Ryan560

You could try taking a cold chisel and hammer and striking the original bends in a couple spots. Much like the commercially available pikie 4 lip. It will stiffen it up a bit.
Another option would be to source thicker gauge stainless at a scrapyard and bend your own lips.I bought a 3'x12"piece of stainless for $3 from my local scrapyard and bend them myself. Time consuming, but you get the lip you want.

THIS