Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Today's Posts Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Build Stuff: Custom Plug & Lure Building, Rod Building » Plug Building - Got Wood?

Plug Building - Got Wood? Got Plug?

Reply
 
Thread Tools Rate Thread Display Modes
Old 03-13-2018, 09:00 AM   #1
tlapinski
All up in the Interweb!
iTrader: (1)
 
tlapinski's Avatar
 
Join Date: Mar 2002
Location: In the dog house.
Posts: 5,198
Thick Lips

Since we're kind of stuck with the thickness of metal lips as they are currently being made, I've been tossing around some ideas on how to strengthen the lips on some of the deep divers that I've been fishing. All too often after retrieving a deep diver that comes in contact with a rock or two, it comes in with the metal lip massively bent out of shape. I then have to bend it back, further weakening the lip and making it even more susceptible to bending again. So aside form buying heavy sheet metal and cutting/bending my own lips, is there an easier solution? Can a pair of lips be soldered together to make a double-thick lip, for example? I know in this case I'd have to drill out the lip slot a bit, but has anyone tried this before I go butchering up one of my JLH maples?

Co-Host of The Surfcast Podcast

"Out there in the surf is where it's at, that's where the line gets drawn in the sand between those who talk fishing and those who live it."
- a wise man.

One good fish, a sharpie does not make...

Certified rock hopping billy goat.
tlapinski is offline   Reply With Quote
Old 03-13-2018, 12:29 PM   #2
Pete F.
Canceled
 
Join Date: Jun 2003
Location: vt
Posts: 13,075
I think you would find stainless hard to solder, possibly sand and epoxy or drill and pop rivet. Might throw the balance off a little having a lip weigh twice as much.

Frasier: Niles, I’ve just had the most marvelous idea for a website! People will post their opinions, cheeky bon mots, and insights, and others will reply in kind!

Niles: You have met “people”, haven’t you?

Lets Go Darwin
Pete F. is offline   Reply With Quote
Old 03-13-2018, 12:58 PM   #3
Nebe
Registered User
iTrader: (0)
 
Nebe's Avatar
 
Join Date: Sep 2003
Location: Libtardia
Posts: 21,591
Toby, you could braze two lips together. Or you could epoxy 2 together.
Posted from my iPhone/Mobile device
Nebe is offline   Reply With Quote
Old 03-13-2018, 01:33 PM   #4
Ryan560
Registered User
 
Join Date: Feb 2010
Location: CT
Posts: 448
You could try taking a cold chisel and hammer and striking the original bends in a couple spots. Much like the commercially available pikie 4 lip. It will stiffen it up a bit.
Another option would be to source thicker gauge stainless at a scrapyard and bend your own lips.I bought a 3'x12"piece of stainless for $3 from my local scrapyard and bend them myself. Time consuming, but you get the lip you want.
Ryan560 is offline   Reply With Quote
Old 03-13-2018, 01:50 PM   #5
JLH
Registered User
iTrader: (0)
 
JLH's Avatar
 
Join Date: May 2004
Location: CT/RI
Posts: 1,627
I'll turn some bodies with larger lip slots if you want to experiment. I've thought about looking into what I would need to make my own thicker lips due to the same issues but haven't gotten very far.
JLH is offline   Reply With Quote
Old 03-13-2018, 02:00 PM   #6
tlapinski
All up in the Interweb!
iTrader: (1)
 
tlapinski's Avatar
 
Join Date: Mar 2002
Location: In the dog house.
Posts: 5,198
Quote:
Originally Posted by Ryan560 View Post
You could try taking a cold chisel and hammer and striking the original bends in a couple spots. Much like the commercially available pikie 4 lip. It will stiffen it up a bit.
I may try this first to see how it works out as it seems like the simplest solution. I don't mind it bending a little here and there, but I've had some lips come back bent almost parallel to the body.

Co-Host of The Surfcast Podcast

"Out there in the surf is where it's at, that's where the line gets drawn in the sand between those who talk fishing and those who live it."
- a wise man.

One good fish, a sharpie does not make...

Certified rock hopping billy goat.
tlapinski is offline   Reply With Quote
Old 03-13-2018, 02:06 PM   #7
Ryan560
Registered User
 
Join Date: Feb 2010
Location: CT
Posts: 448
Something like this Toby. Couldn't post a pic from my phone.
Attached Thumbnails
Click image for larger version

Name:	IMG_1688.JPG
Views:	474
Size:	85.5 KB
ID:	65016  
Ryan560 is offline   Reply With Quote
Old 03-13-2018, 04:55 PM   #8
pbadad
Registered User
iTrader: (0)
 
pbadad's Avatar
 
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
I would try to drill 2 holes into the lip of one then Siamese the 2 together and braze thru holes to the extra lip from the underneath. If u want tell me what lip u use and Ill try a pair and see how it come out. extra front weight but for a dibver I don,t think i will hurt it. Actually may go deeper some what. If it s a Pike lip try a gusset version cut to size you wish. I grind said lips shorter and thinner for certain guys who prefer less action.

Billy D.
pbadad is online now   Reply With Quote
Old 03-14-2018, 08:09 PM   #9
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
I build most of my own lips nowadays, but I am a machinist so it is fairly easy, except for finding the time. You can just buy thicker 304 stainless sheet stock. Most comm guys use .026 stock for their lips you can step up to .032. I use it once in a while but it is tough to work with and bending it accurately in your basement is not going to be fun at all. If you double up the lips your adding weight and you will have to increase the lip slot size too. Best bet is to get some thicker stock sharp sheers and struggle to cut and bend it. Won't be too fun. I posted some pics years ago on how to bend your own lips at home with a bench vise. If you have interest I will see if I can find those pics.

"A beach is a place where a man can feel he's the only soul in the world that's real"
ProfessorM is offline   Reply With Quote
Old 03-14-2018, 08:21 PM   #10
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
get some rt angle alum after lip is cut and sanded put in vise and bend back. Use a scrap piece of alum to flatten the lip against the jaws using a hammer and aluminum to hammer the lip flat. Take out flip put in vise and bend other way again use hammer and scrap alum.
Attached Thumbnails
Click image for larger version

Name:	100_0811.jpg
Views:	435
Size:	139.1 KB
ID:	65022   Click image for larger version

Name:	100_0823.jpg
Views:	421
Size:	139.7 KB
ID:	65031   Click image for larger version

Name:	100_0825.jpg
Views:	460
Size:	132.1 KB
ID:	65032  

Last edited by ProfessorM; 03-14-2018 at 08:28 PM..

"A beach is a place where a man can feel he's the only soul in the world that's real"
ProfessorM is offline   Reply With Quote
Old 03-14-2018, 08:23 PM   #11
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
next
Attached Thumbnails
Click image for larger version

Name:	100_0826.jpg
Views:	430
Size:	120.8 KB
ID:	65033   Click image for larger version

Name:	100_0827.jpg
Views:	428
Size:	107.1 KB
ID:	65034  

Last edited by ProfessorM; 03-14-2018 at 08:30 PM..

"A beach is a place where a man can feel he's the only soul in the world that's real"
ProfessorM is offline   Reply With Quote
Old 03-14-2018, 08:25 PM   #12
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
done
Attached Thumbnails
Click image for larger version

Name:	100_0819.jpg
Views:	478
Size:	200.3 KB
ID:	65028  

"A beach is a place where a man can feel he's the only soul in the world that's real"
ProfessorM is offline   Reply With Quote
Old 03-15-2018, 06:09 AM   #13
pbadad
Registered User
iTrader: (0)
 
pbadad's Avatar
 
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
Nice tutorial Paul. I do some redos similar with a small machinist vise. Most important is getting the lip stock mounted perpendicular to lip when bending.
Posted from my iPhone/Mobile device
pbadad is online now   Reply With Quote
Old 03-15-2018, 11:31 AM   #14
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
I scribe both bend lines before I start.
Posted from my iPhone/Mobile device
ProfessorM is offline   Reply With Quote
Old 03-16-2018, 09:15 PM   #15
fishing bum wannabe
Registered User
iTrader: (0)
 
fishing bum wannabe's Avatar
 
Join Date: Oct 2002
Location: Norwell, MA
Posts: 180
I never bought a lip. I made my own. Not being a machinist like Paul I had to figure out how to cut and bend accurately. What i did for a layout was create a computer file that had the outline, bends and holes on it and print out a bunch of them. Then spray mount them onto the stainless stock you want to use for the lip. Drill the hole before cutting the shape. Cut out close to the outline with sharp compound sheet metal shears and grind the final profile using a grinder or sanding disk. Use a pair of vice grips to hold the lip while grinding as they get very hot very quickly. This is a good time to smooth out the edges. I used a sanding disk with 150 grit for this. I used a hand sheet metal bending brake to make the bends. The most pain part is getting the paper pattern off the finished lip.

fishing bum wannabe
fishing bum wannabe is offline   Reply With Quote
Old 03-17-2018, 07:46 AM   #16
TheLureWasher
Registered User
 
Join Date: Nov 2006
Location: Bristol CT
Posts: 316
Send a message via AIM to TheLureWasher
Just my 2cents I have found that not glueing lips in place is really helpful if it needs to be replaced. Then it's just cut the thru wire, pull it out, replace lip and swivels in needed. Then nothing needs to be cut or redrilled. Just a super tight tail wrap to draw in the lip tight.
Posted from my iPhone/Mobile device
TheLureWasher is offline   Reply With Quote
Old 03-17-2018, 11:08 AM   #17
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
I agree. I never epoxy my lips in.
Posted from my iPhone/Mobile device
ProfessorM is offline   Reply With Quote
Old 03-25-2018, 12:23 PM   #18
Charleston
Certified Mass-hole
iTrader: (0)
 
Charleston's Avatar
 
Join Date: Jun 2003
Location: Jackson, NJ but born and raised in Massachusetts.
Posts: 1,223
Quote:
Originally Posted by Ryan560 View Post
You could try taking a cold chisel and hammer and striking the original bends in a couple spots. Much like the commercially available pikie 4 lip. It will stiffen it up a bit.
Another option would be to source thicker gauge stainless at a scrapyard and bend your own lips.I bought a 3'x12"piece of stainless for $3 from my local scrapyard and bend them myself. Time consuming, but you get the lip you want.
THIS
Charleston is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:38 PM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com