|
|
|
|
|
|
|
|
|
Plug Building - Got Wood? Got Plug? |
|
|
07-28-2022, 02:08 PM
|
#31
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by pbadad
Looks like a level.sink. 8" long?
Posted from my iPhone/Mobile device
|
Slight tail down, and have a shimmy in the water. Think superstrike 1 3/4oz and a Habs 2oz combined.
|
|
|
|
07-28-2022, 06:25 PM
|
#32
|
Registered User
Join Date: Oct 2018
Posts: 24
|
Quote:
Originally Posted by t_man7
Carlezon needlefish duplicates.
|
Tommy, birch dowels? grain looks different then the ones i bought. i have been starting to use more belly weights in needles and getting a better swim/glide out of them.
|
|
|
|
07-28-2022, 07:35 PM
|
#33
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by derekH
Tommy, birch dowels? grain looks different then the ones i bought. i have been starting to use more belly weights in needles and getting a better swim/glide out of them.
|
Birch and one sugar maple, the grain is obvious on the maple one.
These are kiln dried birch dowels from kelloggs hardwood years ago.
Posted from my iPhone/Mobile device
|
|
|
|
07-29-2022, 07:43 AM
|
#34
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
Tommy is that a screw eye hook hole? Looks like a recession to fill w/ epoxy.
Posted from my iPhone/Mobile device
|
|
|
|
07-29-2022, 12:39 PM
|
#35
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by pbadad
Tommy is that a screw eye hook hole? Looks like a recession to fill w/ epoxy.
Posted from my iPhone/Mobile device
|
Yes, wanted to keep it traditional. I figured through drilling with a 5/32 bit would remove too much wood buoyancy and impede upon the action.
Posted from my iPhone/Mobile device
|
|
|
|
07-29-2022, 02:43 PM
|
#36
|
Registered User
Join Date: Oct 2018
Posts: 24
|
Tommy, back in 2008 Flaptail posted the "sd special needlefish" its for an eelskin. it is also built with screw eyes. It is worth building a couple. It works, i changed it a little to thru wire this last year. but the original caught worked good for me
|
|
|
|
07-29-2022, 05:47 PM
|
#37
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
Quote:
Originally Posted by t_man7
Yes, wanted to keep it traditional. I figured through drilling with a 5/32 bit would remove too much wood buoyancy and impede upon the action.
Posted from my iPhone/Mobile device
|
True. Maybe thru one and drop the equivalent weight of wire. Im sure u can create the same effect.
Posted from my iPhone/Mobile device
|
Billy D.
|
|
|
07-30-2022, 11:42 AM
|
#38
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by derekH
Tommy, back in 2008 Flaptail posted the "sd special needlefish" its for an eelskin. it is also built with screw eyes. It is worth building a couple. It works, i changed it a little to thru wire this last year. but the original caught worked good for me
|
http://www.striped-bass.com/Stripert...ial+needlefish
Neat plug, I’ll have to give it a shot. Thanks for sharing!
|
|
|
|
07-30-2022, 12:41 PM
|
#39
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Derek what’s the diameter on the SD SPECIAL?
Posted from my iPhone/Mobile device
|
|
|
|
07-30-2022, 06:32 PM
|
#40
|
Registered User
Join Date: Oct 2018
Posts: 24
|
Tommy, first ones i made i used 3/4 . birch dowel. the thru wire i am playing around with this year i am using ayc and more lead mid plug.
|
|
|
|
07-30-2022, 09:18 PM
|
#41
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by derekH
Tommy, first ones i made i used 3/4 . birch dowel. the thru wire i am playing around with this year i am using ayc and more lead mid plug.
|
Upload some pics, I would like to try my hand at a few; and learn from your mistakes as well!
Posted from my iPhone/Mobile device
|
|
|
|
07-31-2022, 05:04 AM
|
#42
|
Registered User
Join Date: Oct 2018
Posts: 24
|
Quote:
Originally Posted by t_man7
Upload some pics, I would like to try my hand at a few; and learn from your mistakes as well!
Posted from my iPhone/Mobile device
|
tommy, tried to put pictures on computer years ago, never figured it out. could not figure out how to save them or where they were, dont have a cell phone other then old flip phone in truck for emergency. It would be nice to be able to sell stuff, but i made it this long so the hell with it
|
|
|
|
08-01-2022, 11:31 AM
|
#43
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by derekH
tommy, tried to put pictures on computer years ago, never figured it out. could not figure out how to save them or where they were, dont have a cell phone other then old flip phone in truck for emergency. It would be nice to be able to sell stuff, but i made it this long so the hell with it
|
If you can email me them, I can post them up.
Posted from my iPhone/Mobile device
|
|
|
|
08-01-2022, 01:30 PM
|
#44
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
|
Some not so recent.
|
No boat, back in the suds.
|
|
|
08-01-2022, 05:15 PM
|
#45
|
Registered User
Join Date: Oct 2018
Posts: 24
|
Quote:
Originally Posted by t_man7
If you can email me them, I can post them up.
Posted from my iPhone/Mobile device
|
I cant email them to me! i couldnt figure how to get them on the computer. computer i have now has no place to put the card thing. i was told i have to buy something that plugs into the computer.. I was happy with film
|
|
|
|
08-01-2022, 06:44 PM
|
#46
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by derekH
I cant email them to me! i couldnt figure how to get them on the computer. computer i have now has no place to put the card thing. i was told i have to buy something that plugs into the computer.. I was happy with film
|
Hmm, if I ever see you bring it along. Problem solved haha
Posted from my iPhone/Mobile device
|
|
|
|
08-07-2022, 12:22 PM
|
#47
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
|
OK!!! I have had it with this heat. I am giving up on working on one of my decks and going to the plug room in the basement to TURN!!!!!
|
No boat, back in the suds.
|
|
|
08-07-2022, 12:42 PM
|
#48
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by piemma
OK!!! I have had it with this heat. I am giving up on working on one of my decks and going to the plug room in the basement to TURN!!!!!
|
SMART MAN! My dog will sit in the shop with me for hours while I test my designs in the pool. Best plug partner I’ve had. He will watch them swim, if they’re good he keeps his eyes locked in on it.
Posted from my iPhone/Mobile device
|
|
|
|
08-09-2022, 04:57 AM
|
#49
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
|
Quote:
Originally Posted by t_man7
SMART MAN! My dog will sit in the shop with me for hours while I test my designs in the pool. Best plug partner I’ve had. He will watch them swim, if they’re good he keeps his eyes locked in on it.
Posted from my iPhone/Mobile device
|
Love it Tommy. We should figure out how to fish at least once during the fall run.
|
No boat, back in the suds.
|
|
|
08-09-2022, 10:24 AM
|
#50
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by piemma
Love it Tommy. We should figure out how to fish at least once during the fall run.
|
Totally, let’s do it
Posted from my iPhone/Mobile device
|
|
|
|
08-15-2022, 06:36 PM
|
#51
|
Registered User
Join Date: Jun 2020
Posts: 303
|
MS Slammer
|
|
|
|
08-16-2022, 01:59 AM
|
#52
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
|
WOW!!
|
No boat, back in the suds.
|
|
|
08-16-2022, 07:34 AM
|
#53
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
Tommy u joining the "mouse " club!LOL
Bet it swims great on top with that lip.
Posted from my iPhone/Mobile device
|
|
|
|
08-17-2022, 01:23 PM
|
#54
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by pbadad
Tommy u joining the "mouse " club!LOL
Bet it swims great on top with that lip.
Posted from my iPhone/Mobile device
|
Ha, this one I cut the tail fin slot too wide and stuck a sluggo in. The rest get a soft plastic tail.
Posted from my iPhone/Mobile device
|
|
|
|
10-11-2022, 08:14 PM
|
#55
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Anyone turning?
|
|
|
|
10-12-2022, 05:03 AM
|
#56
|
Registered User
Join Date: Oct 2018
Posts: 24
|
Quote:
Originally Posted by t_man7
Anyone turning?
|
Experimental sand eel swimmers and Darter hell. and soon to enjoy system 3 and cold temperatures. I need to build a enclosed box that i can control temp
|
|
|
|
10-13-2022, 08:54 PM
|
#57
|
Registered User
Join Date: Mar 2012
Location: CT
Posts: 2,292
|
Quote:
Originally Posted by pbadad
Derek you may have sealer bleed. 4hrs is way too long to soak. The excess sealer internally may not of fully cured even though its been awhile. I say this because I tried hot soak birch a couple years ago. Yes it absorbed the sealer quick but too much. I was increasing the needle weight by 6-9 grams. The wood weighed unsealed 28 grams. Thats approx 25%. Within a couple weeks of finishing the process of prime- epoxy., I noticed clear coat lifting on half of the needles. The clear cost lifted everything from the bare wood.
Mind you Ive been doing this same needle for 10yrs or so and the only difference done was this excessive soak. Immediately I went back to my proven.method of 30minute cold soak in 60/40 spar varnish and mineral spirits.
BTW I ended up scraping off all the needles to bare wood and let them dry for a month. I weighed them first then after. Found a drop of half the added weight from the sealer. Fellow builders have done experiments in sealing soak times and found no benefit from soaks longer than 10 minutes.
Posted from my iPhone/Mobile device
|
I heat some of my plugs, specifically maple darters to be epoxy sealed. Because epoxy chemically cures there is no off-gassing issue later. The result is a super strong plug, especially considering the bottom lip takes abuse and maple is not sealed well splits, I find the extra time to epoxy seal darters is worth it for me. Ayc darter lips, even if sealed this way still break.
|
|
|
|
10-16-2022, 12:20 PM
|
#58
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
|
Quote:
Originally Posted by t_man7
Anyone turning?
|
Tommy, I have been making some needles for DZ and Bob Huddy. We are fishing The Block the last week of the month on the New Moon. I'll post some pics when I get 5 seconds to breath. My better half has me transplanting stuff after I worked at the GC this morning.
|
No boat, back in the suds.
|
|
|
10-17-2022, 11:48 PM
|
#59
|
Registered User
Join Date: Jun 2020
Posts: 303
|
Quote:
Originally Posted by derekH
Experimental sand eel swimmers and Darter hell. and soon to enjoy system 3 and cold temperatures. I need to build a enclosed box that i can control temp
|
Epoxy and cold temps do not mix. Best of luck!
What style sandeel swimmers? I found the slopehead gives them a little better swim, and cupping the lip.
Posted from my iPhone/Mobile device
|
|
|
|
10-18-2022, 05:00 AM
|
#60
|
Registered User
Join Date: Oct 2018
Posts: 24
|
Quote:
Originally Posted by t_man7
Epoxy and cold temps do not mix. Best of luck!
What style sandeel swimmers? I found the slopehead gives them a little better swim, and cupping the lip.
Posted from my iPhone/Mobile device
|
The sand eel swimmer that Rockfish9 posted a how to on,Tried a couple different lips. rwc, pine, ayc. and some board thats been in the shop for 40 years +. I thought it was pine but sucks up sealer more then any wood i tried.
Lost 2 Agitators to huge bluefish last couple days. so they are on the list to do now
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 05:55 PM.
|
| |