|
|
|
|
|
|
|
|
|
Rod Building So, you've landed a nice fish on a plug you made, eh? Now, the next step, building your own RODS! |
|
03-05-2023, 03:25 PM
|
#1
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
what cha think
it's a GSB 120 1 L started a year ago... seat is on, need to add the quides.. Gosa 6K planned.....
do I need underwraps on those single foot guides ?
GSB 120 L .pdf
|
|
|
|
03-05-2023, 04:15 PM
|
#2
|
Registered User
Join Date: Mar 2004
Location: Marshfield, MA
Posts: 1,746
|
I would Gup
Thin size A
And give the underwrap a very thin coat of finish before wrapping the guide. Thinnest you can. I have been doing that on all my rods lately. Seems to stop some of the ‘noise’ from the guides when bending. If you can relate to what I’m saying.
Posted from my iPhone/Mobile device
|
|
|
|
03-06-2023, 06:32 AM
|
#3
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Quote:
Originally Posted by beamie
I would Gup
Thin size A
And give the underwrap a very thin coat of finish before wrapping the guide. Thinnest you can. I have been doing that on all my rods lately. Seems to stop some of the ‘noise’ from the guides when bending. If you can relate to what I’m saying.
Posted from my iPhone/Mobile device
|
Yes, I think I will …..
guide selection and location drives me nuts….
I’d like to finish this rod so I can try to sell the M I have….
Thanks
|
|
|
|
03-06-2023, 08:30 AM
|
#4
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
Ray its personal preference. Single foot guides usually dont get an underwrap. I did a couple of my 1201L and carbon surf , mostly for beach fishing single guides and a contrasting color underwrap.To assure a secure bound do not use color preserver. Make sure your first coat absorbs thru the thread before wicking off the excessive on the first coat.
Double foots don't need underwrap but look nicer.
When tapering the guide feet
make sure they're extremely smooth underneath to keep from scratching blank or possibly the underwrap.
If u need help with the guide layout,
let me know what and how many guides you have.
Posted from my iPhone/Mobile device
|
|
|
|
03-06-2023, 09:13 AM
|
#5
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
|
I never wrapped a rod as I had Dave at Murats or Charlie and Aaron at CMS who could do a far better job than I.
|
No boat, back in the suds.
|
|
|
03-06-2023, 05:29 PM
|
#6
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Quote:
Originally Posted by pbadad
Ray its personal preference. Single foot guides usually dont get an underwrap. I did a couple of my 1201L and carbon surf , mostly for beach fishing single guides and a contrasting color underwrap.To assure a secure bound do not use color preserver. Make sure your first coat absorbs thru the thread before wicking off the excessive on the first coat.
Double foots don't need underwrap but look nicer.
When tapering the guide feet
make sure they're extremely smooth underneath to keep from scratching blank or possibly the underwrap.
If u need help with the guide layout,
let me know what and how many guides you have.
Posted from my iPhone/Mobile device
|
Awesome
This is included in my original post
http://www.striped-bass.com/Stripert...6&d=1678047802
|
|
|
|
03-06-2023, 08:22 PM
|
#7
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
Ray here's a couple layouts.
These layout were for a Spheros5k
& VS 150
KL30 27" from spool shaft tip.fully extended
KL25 14"
KL16 10"
KL12 8"
KT10 6 1/2"
runners KT10 Spaced no greater than 6" you can progressively space runners i.e. 6, 5.3/4, 5 1/2 5.1/4 5" in any combo that works in dimension left from first KT10.
KL25H 24" from ext spool.
KL12H 35.375"
KL8M 45.625"
KT8 54.5" CHOKE
KT8 runners spaced similar to top layout spacing.
TIP is a #10 ring size.
10-10
Posted from my iPhone/Mobile device
|
|
|
|
03-07-2023, 06:10 AM
|
#8
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Wow, I’ll look at those.
Thanks Billy
|
|
|
|
03-07-2023, 07:45 AM
|
#9
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
On the first layout u can change the KL30 to a KW30. I prefer that guidecfirst to minimize transport damage with a large single foot guide.
Nonetheless try either or both layouts an tweak during static test. The stripper locations offer a quiet braid collection . I dont recommend > 30lb braid on the KL25H but the 30mm guides you can go to 40lb. Any greater lb test its 30" or more . With the 6K spool I would assume 30lb braid .
Posted from my iPhone/Mobile device
|
|
|
|
03-08-2023, 07:18 AM
|
#10
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Quote:
Originally Posted by pbadad
On the first layout u can change the KL30 to a KW30. I prefer that guidecfirst to minimize transport damage with a large single foot guide.
Nonetheless try either or both layouts an tweak during static test. The stripper locations offer a quiet braid collection . I dont recommend > 30lb braid on the KL25H but the 30mm guides you can go to 40lb. Any greater lb test its 30" or more . With the 6K spool I would assume 30lb braid .
Posted from my iPhone/Mobile device
|
Thanks again, I have a KW30 and been thinking of it, my M is set up with that ctrpper then a KL then back to KW’s ……
going to have a tough time getting back to this build , I’ll check back…
|
|
|
|
03-11-2023, 03:58 PM
|
#11
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
I think this is it...
probably leave off the 20....
GSB 120 L 3-11-23 2.pdf
|
|
|
|
03-11-2023, 04:25 PM
|
#12
|
Registered User
Join Date: Sep 2003
Location: Libtardia
Posts: 21,591
|
i cut 4" off the tip of my 2 L's and couldnt have been happier in doing so.
|
|
|
|
03-11-2023, 08:19 PM
|
#13
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
Ray those guides you have on drawing bullseye perfect. I'm redoing a member 1201L now with that set up. Just the 16 from 25 will open spacing. On that blank , more guides utilize the rod's load better in the butt.
Posted from my iPhone/Mobile device
|
|
|
|
03-12-2023, 06:17 AM
|
#14
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Quote:
Originally Posted by pbadad
Ray those guides you have on drawing bullseye perfect. I'm redoing a member 1201L now with that set up. Just the 16 from 25 will open spacing. On that blank , more guides utilize the rod's load better in the butt.
Posted from my iPhone/Mobile device
|
You made my day…. LOL
now to find time to test….
|
|
|
|
03-12-2023, 06:36 AM
|
#15
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Quote:
Originally Posted by Nebe
i cut 4" off the tip of my 2 L's and couldnt have been happier in doing so.
|
What did you do with the other 116” ?
|
|
|
|
03-17-2023, 02:36 PM
|
#16
|
Registered User
Join Date: Mar 2004
Location: Marshfield, MA
Posts: 1,746
|
Ray,
This is what I have been doing lately for single foot guides.
This shows 1 thin coat of finish on blue metallic underwear.
Both white and light blue are over wraps.
The white.....once I get to the guide foot, I go on the other side of the
foot for and 1/8" plus or so just to keep the look symmetric. and maybe this locks things in.
|
Jon, 24' Nauset-Green Topsides, Beamie, North River. Channel 68/69. MSBA, NIBA
|
|
|
03-17-2023, 08:08 PM
|
#17
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Quote:
Originally Posted by beamie
Ray,
This is what I have been doing lately for single foot guides.
This shows 1 thin coat of finish on blue metallic underwear.
Both white and light blue are over wraps.
The white.....once I get to the guide foot, I go on the other side of the
foot for and 1/8" plus or so just to keep the look symmetric. and maybe this locks things in.
|
Yowza! Very nice , I definitely don’t have the patience for that good a job,,, but I’ll try,,, nice work mate
|
|
|
|
03-17-2023, 08:33 PM
|
#18
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
|
I do that occassionally. Working on a friends 120L rebuild. Plan on doing a similar with Ice blue underwrap and silver trim. Black.overwrap.
Ray I did another test session with a different layout. K30 KL 25 20 16 12 KT 10's. It's a hybrid combo. With new Fireline 20lb casts great and quiet thru guides.
Static test excellent.
Posted from my iPhone/Mobile device
|
|
|
|
03-18-2023, 06:04 AM
|
#19
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,454
|
Quote:
Originally Posted by pbadad
I do that occassionally. Working on a friends 120L rebuild. Plan on doing a similar with Ice blue underwrap and silver trim. Black.overwrap.
Ray I did another test session with a different layout. K30 KL 25 20 16 12 KT 10's. It's a hybrid combo. With new Fireline 20lb casts great and quiet thru guides.
Static test excellent.
Posted from my iPhone/Mobile device
|
Thanks
That’s pretty much what I’m going with except the 12 is a 10,,, and maybe drop the 20… I dun no ! :-)
Don’t know when I’ll have time for this either, getting the boat ready and working on a 1954 Evinrude that’s just about ready to put back together….
and besides all that, I’ve got a two day a week job that starts April 1 at a marine company….
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:31 PM.
|
| |