| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
05-16-2006, 03:29 PM
|
#1
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Can you help me ? My hole is crooked ...
Was asked this question... Its about dealing with drilling after a plug is turned .. for those of you that have gone to the bright side of "Hydro Orientation " ,, This is how I do it ... 1 st turn your shape..
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
05-16-2006, 03:31 PM
|
#2
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
#2 turn another one just like it (duplicator?) and rip it in half .. I use a V block on the bandsaw...
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-16-2006, 03:33 PM
|
#3
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
#3 hold rip half way on scarp wood and trace with a pencil
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-16-2006, 03:35 PM
|
#4
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
I marked it with a big fat sharpie so you could see it .. Go cut that out on the bandsaw... notice lines ... i marked other things like belly hole ,, weight hole ,, slope ...will use that later ...
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-16-2006, 03:44 PM
|
#5
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Now that gives you a nice bed to sit the plug on the drill press so the holes will be vertical in your hydro orientated plug .. I also use these (i'll call them plug blocks) to hold against my piece on the lathe ..making sure I'm not over sanding and keeping a uniform shape.. at very end I use it to make all my marks for belly hole .. weight hole,, eyes ,, top of slope .. I'm not saying all plugs have to be hydro orientated.. like needles or heavy belly weighted plugs... Fat plugs no belly weight Nike is a big yes ... jointed unweighted .. YES,,,darters.YES.... Only thing I haven't been able to do is handcarve..
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-16-2006, 03:45 PM
|
#6
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
All done ..
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-16-2006, 05:02 PM
|
#7
|
|
Registered User
Join Date: Dec 2001
Location: Plainfield, CT
Posts: 428
|
Good thread Tagger!
|
|
|
|
|
|
|
05-16-2006, 05:39 PM
|
#8
|
|
Registered User
Join Date: Sep 2003
Location: Libtardia
Posts: 21,692
|
Tagger, why not turn the blank a little longer and use the square ends to hold it on the drill press???
Am i missing something?
|
|
|
|
|
|
|
05-16-2006, 05:45 PM
|
#9
|
|
Registered User
Join Date: Nov 2003
Location: RI
Posts: 21,464
|
Nebe, you clearly don't know a thing about hydro orientation  
-spence |
|
|
|
|
|
05-16-2006, 05:47 PM
|
#10
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Quote:
|
Originally Posted by Nebe
Tagger, why not turn the blank a little longer and use the square ends to hold it on the drill press???
Am i missing something?
|
sorry Eben ... makes no sense unless your familar with Hydro Orientation post ... I made up that word so it would sound hard but its basicly turning the blank and floating it in a bucket of water to find out how the wood wants to float.. which side is up ? Try it .. There is an up and not always predictable and varies in every piece to very mild to very strong.. I used to just wing it and drill all my holes square .. May the force be with you and your plugs .. |
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-16-2006, 06:07 PM
|
#11
|
|
Registered User
Join Date: Sep 2003
Location: Libtardia
Posts: 21,692
|
ooooohhhhhhhhh  |
|
|
|
|
|
|
05-16-2006, 07:41 PM
|
#12
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,125
|
Excellant thread Eddie
thanks for posting it. |
The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely.
1984 was a warning, not a guidebook!
It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.
|
|
|
|
|
05-17-2006, 07:43 AM
|
#13
|
|
Boston Anglah
Join Date: Sep 2004
Location: Sitting on top of the world with my legs hangin free
Posts: 3,322
|
Very good thread, thank you..  |
Used hard and put away dirty....
|
|
|
|
|
05-17-2006, 08:51 AM
|
#14
|
|
Certified Mass-hole
Join Date: Jun 2003
Location: Jackson, NJ but born and raised in Massachusetts.
Posts: 1,223
|
Great info, one question however;
When you rip the plug in half using the Vblock, how do you do it without riping the Vblock in half as well?
I assume this is an ISO 9001 procedure  |
|
|
|
|
|
|
05-17-2006, 10:02 AM
|
#15
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Thanks Ed for answering my question.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
05-17-2006, 10:16 AM
|
#16
|
|
Registered User
Join Date: Oct 2002
Posts: 3,595
|
GO TAGGERMAN 
VB |
|
|
|
|
|
|
05-17-2006, 02:51 PM
|
#17
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Quote:
|
Originally Posted by Charleston
When you rip the plug in half using the Vblock, how do you do it without riping the Vblock in half
|
Bill,,,I ripped some pine 45 degrees on the table saw and glued and screwed it to the plywood..I clamp that in place on the bandsaw table centered on the blade... push whatever I want to split through.. falls off other side .. I also have an off center placement on this board I set up to do lips on round stock .. |
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-17-2006, 04:13 PM
|
#18
|
|
Finally
Join Date: Jan 2003
Location: FL
Posts: 7,181
|
Quote:
|
Originally Posted by Tagger
Bill,,,I ripped some pine 45 degrees on the table saw and glued and screwed it to the plywood..I clamp that in place on the bandsaw table centered on the blade... push whatever I want to split through.. falls off other side .. I also have an off center placement on this board I set up to do lips on round stock ..
|
Still don't get it? The V-jig thing that is, can u do a close up pic Ed? |
F-18® 
It IsWhat It Is
¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º >¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><(((( º>
|
|
|
|
|
05-17-2006, 04:37 PM
|
#19
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
I just threw it on the table... I clamp it in place when I use it.. U can use to for drill press too ... dowels ..
|
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
05-17-2006, 04:52 PM
|
#20
|
|
Finally
Join Date: Jan 2003
Location: FL
Posts: 7,181
|
So, the V-block stays there and you push the plug thru it.
I get it now. Thanx
|
F-18®
It IsWhat It Is
¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º >¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><(((( º>
|
|
|
|
|
05-17-2006, 10:19 PM
|
#21
|
|
Registered User
Join Date: Mar 2006
Location: Eastern LI
Posts: 54
|
Quote:
|
Originally Posted by Tagger
Was asked this question... Its about dealing with drilling after a plug is turned .. for those of you that have gone to the bright side of "Hydro Orientation " ,, This is how I do it ... 1 st turn your shape..
|
Tagger, looks great. That would make one hell of a squid bait if you leave it like that and put eyes on the rear.  |
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 05:57 AM.
|
| |
Hybrid Mode